there are no dvd key in your dummy.binHere it is:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.91 Beta (300)
Session Started Tue Jan 17 20:21:49 2012
This is a 32 bit process running on a 32 bit CPU
X360USB PRO detected, Version 0.18
New CD/DVD detected.
Found drive A: - Removable.
Found drive C: - Hard Drive.
Found drive D: - CD/DVD.
Found drive X: - Network.
Found drive Y: - Network.
Found drive Z: - Network.
No Hitachi drives were found!
portio32.sys Driver not Installed
Found 3 I/O Ports.
Found 0 Com Ports.
Found 7 windows drives A: C: D: E: X: Y: Z:
Found 1 CD/DVD drives D:
Loading firmware file C:\Documents and Settings\Administrator\Desktop\Dummy.bin
MD5 hash: 530b49b70616fadeed35dabb0d1756fa
Inquiry string found
Identify string found
Drive key @ 0xA030 19E52EAA759EF93DB467142281AD5482
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Loading firmware file C:\Documents and Settings\Administrator\Desktop\Everything to Flash\JungleFlasher (LT+ 3.0)\Firmware\Stock Firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin
MD5 hash: e7e0f802769fd80329784ca4b512f1a9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Found 0 Com Ports.
PortIO unloaded.
Drive is Lite-On..
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x0
....................
Device Intro failed!
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x0
.....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x0
....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
ANSWERED Stuck at the last hurdle - DVD Key
- Thread starter totalnewbie
- Start date
going by your jf log you have flashed it back to stock , so it wont play backups anyway
FNGdude you've misread it, his key is there , otherwise it wouldn't play originals !!!
see the bit where it says 'DVD Key copied to target'
if you really want to verify your key go to the Firmware32 tab and right click on firmware type , click verify key...must have drive hooked up though and all info there
FNGdude you've misread it, his key is there , otherwise it wouldn't play originals !!!
see the bit where it says 'DVD Key copied to target'
if you really want to verify your key go to the Firmware32 tab and right click on firmware type , click verify key...must have drive hooked up though and all info there
Last edited:
It more than likely it has something to do with your backups then. It the flash wasn't right originals wouldn't work either
yes your right then what will be problem
i think you have to patch it again, am i right Lizardpcs?
Last edited:
I have upgraded to LT 3.0 and it will play standard games but not copies. It did though show the game in the dashboard (title and image) but when it loaded it came up with the "This disc is not supported".
x360ccm
BANNED
what game is it and how was it burned to disk,and what media are you using for your back ups.
upgrade your dashboard to the latest one and make sure you run your game through xbg
had the same prob myself
had the same prob myself
It was Black Ops. I tried NBA JAM and IT WORKED!
I am pumped and over the moon! Flashed my first Xbox! Thanks everyone!
x360ccm
BANNED
you will need to run black ops though abgx it will fix the topology data for you.then reburn it.
i take it you got the new abgx.
http://www.team-xecuter.com/forums/showthread.php?t=79171
i take it you got the new abgx.
http://www.team-xecuter.com/forums/showthread.php?t=79171
Last edited: