LITEON DG-16D4S - SLIM Stuck at "Writing Bank 0: ."

[shiffner]

Hey guys,

My Jungleflasher gets stuck when trying to Write Bank 0.
Tried on both Windows 7 (running as admin) and Windows XP

F/W Version: 0401

Log:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Tue Feb 07 23:38:08 2012

This is a 32 bit process running on 4 x 32 bit CPUs
X360USB PRO detected, Version 0.18

portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 0 Com Ports.
Found 5 windows drives C: D: E: F: G:
Found 2 CD/DVD drives D: E:

Loading firmware file C:\Users\Lucaz\Desktop\DO NOT f**kING LOSE\Dummy.bin
MD5 hash: 2dac50f8d9d9cf8156f8ed034a164f36
Inquiry string found
Identify string found
Drive key @ 0xA030 EBC2743C1B2DA104053704994F383BCA
Firmware Osig: [PLDS DG-16D4S 0401]
Firmware is: SlimKey Extract
Loading firmware file C:\Users\Lucaz\Desktop\DO NOT f**kING LOSE\cfw3.0.bin
MD5 hash: 9d9cbc7e565842af11d963c5b6d36633
Drive key @ n/a EBC2743C1B2DA104053704994F383BCA
Firmware Osig: [PLDS DG-16D4S 0401]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key already matches
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target
Serial data already matches

Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Sending Spi UnLock request to Port 0x0000

Spi Status: 0x00

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Writing target buffer to flash
Writing Bank 0: .

 

[kwazziee]

Don't worry just keep doing it. I had the same problem every time I flash I go the same thing as you. you will have to try it as many time over. Try turning any antivirus program off just to be safe. Good luck.

 

[Martin C]

Who unlocked your chip and has it been flashed to prior to it being unlocked(drilled)?

 

[chappersjohn]

if its a kamakarzi hack then they can be a little bit of annoying if this happens but they will flash just give it a couple more goes I cant help if its a mxic as iv been unlucky not to get any of them to test but I have never had this prob with the TX PCB that's what I all ways go with because its the best for the price

 

[shiffner]

Thanks for the responses, guys.

I basically waited for my x360usb pro to come in the mail. Once I received it, I followed the Jungle Flasher tutorial step by step. Not too sure what drilled is, sorry pretty new to all of this. However, right before I attempt to click the "Write" button in the MTK32 Flash tab, The button with the hex value "0x8C" then I hit the switch on my x360usb pro and the hex valued button changes to "0x00" which I assumed meant it was unlocked. From there I try to write to bank 0. This is where it processes something for a few seconds (hourglass icon) and then stop. All buttons come back, aka. they are no longer grayed out and from there I am stuck. Hopefully that answers the question of who unlocked it. Also, I've never attempted to flash this drive prior to this attempt that has failed.

Sorry for the long winded response and thanks for all the help!

 

[Martin C]

You NEED to unlock the drive or replace the chip/PCB (latter being the better option).

 

[xbox360 hacker]

Reading your jf.log you have a winbond which requires a kamikaze unlock method (not a noob friendly hack) At no point during unlocking flashing do you move the switch on the usbpro that switch is only for updating the usbpro. The only reason that it reports unlocked when you move the switch is you have put your usbpro in to bootloader status which is reporting wrong info to jungle flasher.

 

[max games]

hi, try this,
01. load ofw to JF and create LT3 cfw and save cfw.
02.now erase the drive from flashing task and outroATA.
03. (download dosflash 32) connect sata 0 (master) port to dvd drive( usb pro not supported dos flash)
04.restart pc and run dosflash 32
05. check port, flash chip ,proprieties (make sure lite on slim drive)
06. select write flash under the task
07. write flash....
its solve your problem 100% sure

 

[WestCoastConsoles]

hi, try this,
01. load ofw to JF and create LT3 cfw and save cfw.
02.now erase the drive from flashing task and outroATA.
03. (download dosflash 32) connect sata 0 (master) port to dvd drive( usb pro not supported dos flash)
04.restart pc and run dosflash 32
05. check port, flash chip ,proprieties (make sure lite on slim drive)
06. select write flash under the task
07. write flash....
its solve your problem 100% sure

His spi is not unlocked no way will this work. He needs to unlock the drive to be able to write to it.

 

[Farouk123456]

Thanks for the responses, guys.

right before I attempt to click the "Write" button in the MTK32 Flash tab, The button with the hex value "0x8C" then I hit the switch on my x360usb pro and the hex valued button changes to "0x00"

aha
the button of on and of on your usb pro isnt for unlocking the slim drive but for updating!!!!!!:facepalm:
its not unlocked supposingly:rolleyes2: