Stuck on "xecuter rox my box"

[Hyperchickens]

i have x3 with 3294 bios, no dash because i couldnt get one on.
i was playing with x3 config live and put a password on without knowing what it did.
now im stuck at logo and xecuter rox my box. ive tried pressing white, abxy but nothing works.

it worked fine just two days ago but now it doesnt. any ideas?

 

[flipedout]

i had the same problem looked around on here and found a post like yours and found out how to fix it. I had set the password when i frist got my xbox back up. To fix this i had to reflash the bios with x3 1892 build and erase the password hope this helps

 

[Raptor2569]

Ok?

So how can I find such an old bios....This sucks! and I also did the password I can't use any other bios. I have a Ver 1.6b. I can't its just stuck!
Please help!

 

[Rookio]

Can you run an evox boot disk still? If so FTP X3erase to your xbox and run it. you should then be able to boot your normal bios.

 

[XDK]

So how can I find such an old bios....This sucks! and I also did the password I can't use any other bios. I have a Ver 1.6b. I can't its just stuck!
Please help!

you have a friend nearby with an x3ce? if so you can hotswap your chip with his and reflash your bios to 1959v16plus remove the password and then u can restore 3294v16plus (never again setting a password)

its a good idea once u have this fixed to just leave 3294 on banks 1-4(1mb) and 1959 on banks 5-8(2mb range) this way should u have some probs later u can boot into your 2nd 1mb bank and fix the probs

keep us updated , dont fret i had this same problem but it was 100times worse but eventually solved it

 

[mrozde]

I - like an idiot - changed my X3 Live password - what now?

I too have this problem. XBOX 1.6B. I have 3.0.3 on banks 5,6,7,8. Flashed X3 on 1,2,3,4 and everything was working just fine. Enabled the X3 Config Live password and now I'm sitting at the Xecutor Rox my Box screen. I boot from banks 5,6,7,8 (3.0.3) and reflash 1,2,3,4 with X3 - same result. Let me know if I'm screwed.