RGH [Stupid question ]4 day stuck in 1 situation and i not understand :(

[CaptainBlood]

I not understand 1 think,is 4 day i still stay stuck in this situation and cant find way to fix it:

WORKING CONFIG:
XBOX360 SLIM TRINITY +RGX 1.0 work PERFECT whit the normal config TX guide:
Cpu_Rst 10CM
Postout 12CM
No pfcap
Cpurst wire 10cm go to 29 cpurst point of the SLIM POST QSB V3
Postout wire 12cm go to 70 postout point of the SLIM POST QSB V3

The Console always BOOT so fast 1-2 or 3-4 glitch always...

So i hav want try to make the same config,but whit use the CPURST point on the qsb and make the wire 29cm or 19cm but not work...
Example
NOT WORKING CONFIG (but is the same! only i change the POINT on the QSB)
THE SAME XBOX360 SLIM TRINITY +RGX 1.0:
Cpu_Rst 29CM or 19CM
Postout 12CM
No pfcap
Cpurst wire to cpurst point of the SLIM POST QSB V3
Postout wire to to 70 postout point of the SLIM POST QSB V3

Console Never boot...

IF i back whit the CPURST QSB 29 and wire 10 it BOOT... how possible this i not understand,still crazy..

How this is possible,this is the same config,10CM WIRE + 19CM QSB is 29 CM total
so if i make a WIRE CPURST 29CM and i plug it to the CPURST point of the QSB the result need be the same... but not..

I not understand WHY ?

 

[BL4K3Y]

Did I miss something here?

Are you working on two different consoles?

 

[CaptainBlood]

Did I miss something here?

Are you working on two different consoles?

Yes i know same is strange question my... i try to explain now to you what i mean..

The console is the SAME i only use 1 console.
And whit this configuration it work
Cpu_Rst 10CM
Postout 12CM
No pfcap
Cpurst wire 10cm go to 29 cpurst point of the SLIM POST QSB V3
Postout wire 12cm go to 70 postout point of the SLIM POST QSB V3
The Console always BOOT so fast 1-2 or 3-4 glitch always...


Then coz i'm CURIOUS and coz i like to TEST,i hav want try to make it boot whit NOT use of the 29 point,but make a wire that is same the 29 point and put it in the default cpurst point on the qsb but if i make this console not boot,wait i try to make picture for explain.

EDIT: wait i make picture for explain better

 

[Martin C]

Infraction issued - enough's enough.

We have templates for support and you're consistently asking for help without them. It's just a waste of everyone's time.

Read the rules again.

 

[DBTarmac]

So he has it working. and wants to know why its not working with a different config than he found working? WTF

 

[BL4K3Y]

So he has it working. and wants to know why its not working with a different config than he found working? WTF

That's exactly how I read it lol.

Thread closed.

 

[Martin C]

Not quite - he's saying it works with CPU_RST at 29 (with a 10cm wire) but won't work with a 29cm length of wire.

 

[BL4K3Y]

Not quite - he's saying it works with CPU_RST at 29 (with a 10cm wire) but won't work with a 29cm length of wire.

The QSB uses the serpentining technique doesn't it?

I guess the trace runs it uses were found to be "optimal" for the best results during internal testing.

This is the only reason I can think of why the OP had problems using a 29CM wire.

 

[Martin C]

Typically, the OP didn't provide any images of his work so everything has to be an assumption...