Support of 160-250Gb Harddrive
- Thread starter kottarnas
- Start date
Excellent Tuhnu. Do you have it all on one partition? So you can see all space in, for example E: , in evolution X?
I have a 250gb. When you format it with the X3 Config Live it will format the C:, E: (which is nearly 5gb), and X:, Y:, and Z: accordingly - as the stock drive does ... and give you options on F: and G: ...I put all of my remaining space on F:
Hi, i have a 2.6 chip on a 1.6 motherboard, what bios should i be using, that supports 160 - 250gb hard drive?
Thanks
Emlyn
Thanks
Emlyn
liteon froze
hey all i tried reading my lite on and its messed up somehow it wont eject i think its locked, ive seen a tutorial how to unlock it but im struggling on how to make a bootable usb drive with dosflash please can someone help
hey all i tried reading my lite on and its messed up somehow it wont eject i think its locked, ive seen a tutorial how to unlock it but im struggling on how to make a bootable usb drive with dosflash please can someone help
Re: liteon froze
i hope you have your keys for your drive
if your computer doesn't freeze when the lite-on is connected, you can just resend the lite-on erase command to the respective port
it doesn't matter that it isn't detected at all, as long as you know the port for which it is connected to
if it doesn't completely erase after this power down, send intro/device id, then power up
you should get good flash status 0x72 and then be ready to flash, assuming you have the keys
i hope you have your keys for your drive
if your computer doesn't freeze when the lite-on is connected, you can just resend the lite-on erase command to the respective port
it doesn't matter that it isn't detected at all, as long as you know the port for which it is connected to
if it doesn't completely erase after this power down, send intro/device id, then power up
you should get good flash status 0x72 and then be ready to flash, assuming you have the keys
Re: liteon froze
i have all the keys for the drive..... i cant send the erase because all the options are greyed out i cant do anything and the drive will not open and close.
i have all the keys for the drive..... i cant send the erase because all the options are greyed out i cant do anything and the drive will not open and close.
Re: liteon froze
sorry had the wrong port.....ok so i send the lite-on erase then says going to resend the command power of and on within a second i do this but it just keeps going with lots of dots any ideas
sorry had the wrong port.....ok so i send the lite-on erase then says going to resend the command power of and on within a second i do this but it just keeps going with lots of dots any ideas
Re: liteon froze
make sure you are running jungleflasher as administrator
also, disable all your dvd drives in the device manager of windows, or physically unplug them
once again, check to make sure you are using the right port
grayed out options should be enabled then
(its not a big deal that the drive won't open and close, it just doesn't have any firmware on it)
make sure you are running jungleflasher as administrator
also, disable all your dvd drives in the device manager of windows, or physically unplug them
once again, check to make sure you are using the right port
grayed out options should be enabled then
(its not a big deal that the drive won't open and close, it just doesn't have any firmware on it)
Re: liteon froze
ok ive sent the erase but it says the drive returned status ox7f and the device intro failed!!!!!
ok ive sent the erase but it says the drive returned status ox7f and the device intro failed!!!!!
Re: liteon froze
Device Intro failed!
Sending Lite-On-Erase request to port 0xEC00
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a
im getting these messages now
Device Intro failed!
Sending Lite-On-Erase request to port 0xEC00
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a
im getting these messages now