Switch lite not turning on after SX install attempt

[MortuuS]

Hi all,

I think I might have messed up my SX lite install..
Installed the bottom flex only (the one for the caps). Tried to turn on the Switch to see if it would still turn on. My intent was to make it easier to fault find later on if neccessary..
Nothing happened. So I tried it again with the bottom flex removed. Still nothing, no power/fan.
Tried holding the power button for 15 seconds and turn it on again. This made the home button light up blue for a split second. Then nothing..

This is how it looks now. Has anyone got an idea? Thanks!

 

[teamxbox]

Double check the flex connection to the right of the usb-c charging port and the flex cable by the top L trigger/battery and any other flex cables that you may have touched. Compare the picture in the instructions with your board and make sure you didn't knock any small caps off around the outside of the shield when removing the shield for the Nvidia Chip.