I'm trying to flash my X3 with 1957 or M8plus (which is better?), I'm going to recheck my LPC solder points, as it seems I'm getting a blank screen with red pwr LED (13+14?) but only when the switch is on 1Mb if its lower with X2_4977 it's ok, I can FTP, latest Evox is working, any files need are in C: on the box (bioses in C:\bios\). What is each of the bank modes switch setting?! I looked for tutorials, diagrams, etc, to no avail, though alot of posts told me what I needed to know to get this far (thanks guys 
. I've read X3 has 15 different bank settings, which is the backup? The flash switch on the chip is off, and the 5th switch is off too (settings are; on on off off off). Are the first 4 switches much like the matrix's 2? (my previous mod X3R0XMYB0X!)) Did I leave anything out? Thanks.
. I've read X3 has 15 different bank settings, which is the backup? The flash switch on the chip is off, and the 5th switch is off too (settings are; on on off off off). Are the first 4 switches much like the matrix's 2? (my previous mod X3R0XMYB0X!)) Did I leave anything out? Thanks. 