SX Core (Mariko V2) only boots into OFW

[Kilik]

Hi! All went good, I got the green LED and the SD Card logo. I am using SX OS V3.0.4 on a FAT32 SD Card (Guiformat FAT32) I can enter the boot menu, but when I select "boot costum FW" it always boots into the original FW. I tried different SD Cards (512 and 128 GB) and exFat, I already got the full SC OS license. I'll also check the SC Card Reader connection (again). What else can I do? Would it still boot into the menu if the solder points were no good? Thanks for your support

 

[Targaryen31]

Open your album. It always looks like ofw until you go into album. if you press the L button when you enter the album it enters the album normally. If you press the R button it enters the homebrew menu. And if you just enter the album by pressing A alone, you enter the SX OS and press L and R to navigate between tabs.

See the following link for more help: https://www.youtube.com/c/TechSupportGamer/search?query=sx+os

 

[moggymyers]

im having the same issue, boot it up with cfw then click on album and just gives me the original album, any tips?

 

[teamxbox]

Hi! All went good, I got the green LED and the SD Card logo. I am using SX OS V3.0.4 on a FAT32 SD Card (Guiformat FAT32) I can enter the boot menu, but when I select "boot costum FW" it always boots into the original FW. I tried different SD Cards (512 and 128 GB) and exFat, I already got the full SC OS license. I'll also check the SC Card Reader connection (again). What else can I do? Would it still boot into the menu if the solder points were no good? Thanks for your support

Did you have any messages or problems when setting up the EmuNand ? If it gets the green led and boots into SX menu then the solder connections are fine