SX OS v2.9.1 - firmware update version 9.0.1

[[Slide]]

TX has mentioned there are problems with stealth mode so stay offline the are working on a fix

 

[alexmanny]

Try to remove autorcm. Most people getting Blackscreen are stuck on autorcm after boot into cfw. So was I in the beginning.

Just remove autorcm. But before that make a nand backup. It just doesn't brick you Switch that easily. You're making that backup for this case btw. Without that backup you will have a hard time restoring your Switch If it bricks. With the backup you can always boot with the sx pro dongle and restore the nand.

Thanks for your reply but I'm not using Autorcm, I just bought the switch and I haven't done anything at all to it, just loaded sx os 2.9.1 and trying to load CFW thats all I tried to do.

 

[[Slide]]

I had a error leaving the album screen while in docked mode with 2.9.1 Handheld mode works

Docked mode eroers 9.0.0-9.0.1

XCI compatibility issues 9.0.0-9.0.1

Problems with stealth mode 9.0.0-9.0.1

 

[Exile20]

the new ones do tho and is the only reason i want to ... but again i dont use any custom things only use nsp's in offline.

Which games needs the new fw?

 

[[Slide]]

hmm SXOS_beta_v2.9 FW 9.0.0 FIFA 20 works in docked mode some times on 2.9.1 it doesn't work

 

[TubeBar]

the new ones do tho and is the only reason i want to ... but again i dont use any custom things only use nsp's in offline.

Until you run a game that requires 9.0 it's pretty silly to upgrade as all you get is bugs that aren't in previous versions. I am not aware of any games that require 9.0 yet, though there maybe some. I am still running 8.1 until they iron out the bugs.

 

[[Slide]]

No games currently require 9.0 some newer updates do like FIFA it needs Firmware 9.0.0 and master key 7.0 u can ignoring firmware by using sx installer

 

[Hells_Child22]

I am running Emunand 8.1, SX 2.8 and FIFA 20 is asking for an update, shall i just ignore until SX 2.9 is fixed from bugs to work with FW 9.0?

Im in no rush to update but i just want to make sure its safe before i do.
Thanks

 

[newbiE247]

Thanks for your reply but I'm not using Autorcm, I just bought the switch and I haven't done anything at all to it, just loaded sx os 2.9.1 and trying to load CFW thats all I tried to do.

Is your SD card formatted as exFat? If so formatting it fat32 will help.

 

[[Slide]]

I am running Emunand 8.1, SX 2.8 and FIFA 20 is asking for an update, shall i just ignore until SX 2.9 is fixed from bugs to work with FW 9.0?

Im in no rush to update but i just want to make sure its safe before i do.
Thanks

if u have the nsp Update v1.0.1 u can ignoring firmware by using sx installer v2.00

 

[franfimenezca]

if u have the nsp Update v1.0.1 u can ignoring firmware by using sx installer v2.00

Sx Installer 2.0 chashes when I try to boot it.

 

[SeverdNerv]

No games currently require 9.0 some newer updates do like FIFA it needs Firmware 9.0.0 and master key 7.0 u can ignoring firmware by using sx installer

The new Yooka Laylee requres 9.0 and so does Ghostbusters remastered and Luigis mansion is most certainly gonna require it

 

[[Slide]]

Sx Installer 2.0 chashes when I try to boot it.

try delete the cache folder in switch/sx

The new Yooka Laylee requres 9.0 and so does Ghostbusters remastered and Luigis mansion is most certainly gonna require it

yes they use 9.0 updates but u can use sx installer and ignoring firmware i teste Yooka Laylee/Ghostbusters and the are working

 

[franfimenezca]

try delete the cache folder in switch/sx

yes they use 9.0 updates but u can use sx installer and ignoring firmware i teste Yooka Laylee/Ghostbusters and the are working

what should I deleite exactly? Tere are 3 folders (themes, db and saves) and diferent archives...
Thank you!

 

[[Slide]]

what should I deleite exactly? Tere are 3 folders (themes, db and saves) and diferent archives...
Thank you!

in sxinstaller_v2.00.zip there is switch/sx/cache.themes.sx.nro try delete cache folder and run sxinstaller agian if it still not working try delete cache.themes so u only have sx.nro in switch/sx/ works on 8.0.1 8.1.0 and 9.0.0

 

[aledbarros]

Hi all, i have the same issue, i install for the first time Sx, i have 9.0.1 firmware. The sx support team told me it that the version going to run. But after put the license file and run only have the black screen. Could someone fix it? Thanks and regards

 

[Enterchrishikari]

Hi all, i have the same issue, i install for the first time Sx, i have 9.0.1 firmware. The sx support team told me it that the version going to run. But after put the license file and run only have the black screen. Could someone fix it? Thanks and regards

I was having this issue too.
So when booting into SX keep holding the volume up button and it’ll take you to the SX menu successfully.
When you enter rcm and send the payload only let go of the power and volume down button.
keep holding volume up. Try that

Hi, i updated to 9.0.1 and sx os 2.9.1, i can boot to OFW but when i try to boot CFW I get the Nintendo logo and then nothing. Do any of you know why? Thanks!

I was having this issue too.
So when booting into SX keep holding the volume up button and it’ll take you to the SX menu successfully.
When you enter rcm and send the payload only let go of the power and volume down button.
keep holding volume up. Try that

 

[aledbarros]

I was having this issue too.
So when booting into SX keep holding the volume up button and it’ll take you to the SX menu successfully.
When you enter rcm and send the payload only let go of the power and volume down button.
keep holding volume up. Try that

I was having this issue too.
So when booting into SX keep holding the volume up button and it’ll take you to the SX menu successfully.
When you enter rcm and send the payload only let go of the power and volume down button.
keep holding volume up. Try that

Hi, thanks for help, but not working, wen i hold the volume up button open the SX Menu without problem, but wen try to run the sx os then put blac screen again. First have the nintendo Logo and then the black screen again. Best regards

 

[[Slide]]

Hi, thanks for help, but not working, wen i hold the volume up button open the SX Menu without problem, but wen try to run the sx os then put blac screen again. First have the nintendo Logo and then the black screen again. Best regards

do u hvae a original game in the machine? try remove it (i read that license file break if u are online on 9.0.1 not sure if it is true )

 

[Hackerjac]

I was having this issue too.
So when booting into SX keep holding the volume up button and it’ll take you to the SX menu successfully.
When you enter rcm and send the payload only let go of the power and volume down button.
keep holding volume up. Try that

I was having this issue too.
So when booting into SX keep holding the volume up button and it’ll take you to the SX menu successfully.
When you enter rcm and send the payload only let go of the power and volume down button.
keep holding volume up. Try that

Where did the vol- "down" came into play ?
To enter rcm you have to hold vol+ (up) and press power