SX Pro won't work

[MatheuzHUE]

Hi guys, i just received my SX Pro and tried to hack my Switch but it simply doesn't turn on.

My Switch is hackable, i did the test and showed 0x7000 and the QR Code.
I downloaded the boot.dat and it's in the micro SD, placed the dongle and tried to turn on, nothing.

I placed the jig and tested with Tegra to see if it's working and it showed RCM ON, so it's working too. I don't know what's happening..

 

[imprezgc8]

There's a few things to look at. Hold the power button for about 20sec so that the switch powers fully off. Once you do that plug your jig in and your dongle. Then hold the vol+ while pressing the power button and let us know what happens. Keep an eye on the dongle for a green light.

If you get nothing on the dongle then you just need to charge it. You can use a micro usb cable for that.

 

[Wolfcreation]

Could it be your firmware? If you updated to 7.0.0, your firmware might be blocking you from using SX Pro till they come out with a fix.

 

[MatheuzHUE]

Thanks for your answers!
My firmware is 6.2!

When I do what you say Imprez, my switch gives me a blank screen and it enters in rcm mode.
I don't have my dongle right now, but I'll try what you said. I didn't know that I needed to charge it.

 

[Boochy33]

Make sure you plug it into your PC for about 10 seconds to charge it.