Team Xecuter Presents RGH 2.0 *NOW RELEASED*

[Icy-Tank]

I've been doing this for ages now so I know good about the glitch

Not to nit pick, but how you are going to tell the guys who took a shoddy situation, stepped in and gave THE best RGH solution, and then furthered it by creating even more products that are further improving upon things that were years ahead of everyone else...that you've been doing this for ages.

RGH wasn't even released until August 28th, 2011...

October 28th, 2011...the cool runnner was shipped out to distributors and became available on the open market, which provided the first REAL solution for RGH and has quite literally decimated everyone elses options for RGH. Anyone who RGHs right now uses a Cool Runner...

That being said, how have you been doing this for ages and "know good about the glitch" when it's been out for less than 8 months and a real solution for it has been available for only 6?

That's like going to school to be a brain surgeon, getting your first semester of general studies down, and then saying you're ready for the operating room...

 

[mexicanvalium]

i'm on the same boat as 128bit,
i'm confused as to if i need my cpu key on my 14719 phat xbox or not as it stated that it wasn't need but then said it is later on in the post.
Any clearing up would be great

 

[jsinger47]

Rgh2 is so you can get the key on 14717 or higher. Its what you've been waiting for all this time.

 

[Icy-Tank]

i'm on the same boat as 128bit,
i'm confused as to if i need my cpu key on my 14719 phat xbox or not as it stated that it wasn't need but then said it is later on in the post.
Any clearing up would be great

Did you read anything besides this page?

Yes, you need your CPU key...

It's been stated about...I don't know, maybe 200 times in the past 10 pages of threads...

 

[Martin C]

i'm on the same boat as 128bit,
i'm confused as to if i need my cpu key on my 14719 phat xbox or not as it stated that it wasn't need but then said it is later on in the post.
Any clearing up would be great

It should be clear by now that in order to complete the RGH process, you will need your CPU key.

RGH2.0 now allows all consoles to be glitched, meaning not only can you get the CPU key but you can boot into an RGH dashboard.

If this still doesn't make sense, I'd start reading from the top.

 

[mexicanvalium]

makes sense so this is just another exploit to retrieve that damn key that i carelessly lost due to an update?

---------- Post added at 00:22 ---------- Previous post was at 00:20 ----------

I understand my question seemed to get a few people edgy and cranky, i apologize. I was just curious as it said it was needed then it was not. Just got confused, sorry guys.

 

[Icy-Tank]

Just for your information I am the creator of the Glitch360Key, Glitch360Prog, Glitch360Spi, Glitch360Shark.
Glitch360Key is the second glitch chip that was made, selling mostly in france and working like a charm.
It came out way long time befor the TX CR.

So let me get this straight...

You develop all this wonderful stuff, even claim to develop the second glitch chip...sell to mainly France and have no problems...and you come to TX, use their stuff, and are asking questions becuase you're running into issues...

Yep, that makes TOTAL sense...

I know when I make all my wonderful inventions, I go to competitors websites to use their stuff instead of my own and ask them for support for their products instead of continuing development in my own line...

 

[ZakWaRRioR]

Did TX make the hack glitch ?? no, it's the same story they tested stuff and made their own.
Now I'm only saying that as it is you can't run a dash 14719, maybe files missing or LDV issues. Gona check into it more, I asked question in case ubergeek know. Now don't get all cranky

 

[conmon]

i got xell working, too... but still boottimes of about 10minutes...
i use XSVF file "A" (tried B,C,D, made it worse)
i use normal lenth of RESET wire + 10 Ohm

why u remove C15 ?

 

[063 xobx]

"RGH2.0 now allows all consoles to be glitched, meaning not only can you get the CPU key but you can boot into an RGH dashboard."



this is not true, considering that xenons are left out in the cold.:facepalm:

b

 

[jsinger47]

Did TX make the hack glitch ?? no, it's the same story they tested stuff and made their own.
Now I'm only saying that as it is you can't run a dash 14719, maybe files missing or LDV issues. Gona check into it more, I asked question in case ubergeek know. Now don't get all cranky

Jasper and falcon dashes worked for me in testing. Remember, this release was rushed. Let's wait for jrunner and other programs to be updated.

 

[Tonyrw22]

"RGH2.0 now allows all consoles to be glitched, meaning not only can you get the CPU key but you can boot into an RGH dashboard."



this is not true, considering that xenons are left out in the cold.:facepalm:

b

who gives a sh*t about xenons you can pick up second hand falcons or jasper for almost nothing.

 

[Ubergeek]

i'm on the same boat as 128bit,
i'm confused as to if i need my cpu key on my 14719 phat xbox or not as it stated that it wasn't need but then said it is later on in the post.
Any clearing up would be great

this has already been answered 4 posts before you made this one (and its also very clear in the original release nfo)

the whole point of RGH2 is that you can get the CPU key using Xell with the latest dash

I think the problem is some of you guys dont speak English very well.

---------- Post added at 11:02 ---------- Previous post was at 11:00 ----------

"RGH2.0 now allows all consoles to be glitched, meaning not only can you get the CPU key but you can boot into an RGH dashboard."



this is not true, considering that xenons are left out in the cold.:facepalm:

b

You were already given a RGH solution for Xenon's. If it's useless to you make your own hack - I'm getting a little irritated at your complaining.

---------- Post added at 11:04 ---------- Previous post was at 11:02 ----------

Did TX make the hack glitch ?? no, it's the same story they tested stuff and made their own.
Now I'm only saying that as it is you can't run a dash 14719, maybe files missing or LDV issues. Gona check into it more, I asked question in case ubergeek know. Now don't get all cranky

No we didn't make RGH v1

Yes we made RGH v2

What's your point exactly ? All I see from your posts is whining and complaining.

 

[mexicanvalium]

to @ubergeek i realized that it was asked and there were answers in front of me, i just haven't had a good night rest and everything seemed to contradict in my brain eugh i don't know but thanks for clearing it up.
Plus i do speak and read english well

 

[Ubergeek]

makes sense so this is just another exploit to retrieve that damn key that i carelessly lost due to an update?

RGH2 is to glitch all consoles that have been updated to 14717/14719 and also all refurbed consoles that have DUAL_CB

I read the release notes and understood it perfectly.

 

[thanoulas]

Sorry to ask again but I didn't get an answer and can't find anything relevant in all 44 pages
If you remove the cap from the CR Rev. A or Rev. B I guess you can't RGH 1.0 any more with that one, unless you put it back?

Thanks TX for this one again!

 

[ythemaster]

I love you Team-Xecuter!!!

 

[J2G]

I have Jaspers and falcons RGH2 glitching fine you just need to find the G-Spot :biggrin:

@063 xobx
Xexon is like a dog i had one time begging me to put him out of his misery

 

[ZakWaRRioR]

here is how I solved it, the cbb5773 wasn't right. Got another one and worked (not one from the tx .rar). Got the glitch down from 3m to 5sec,

Now like i'm not bitchy I'll tell you how.
First make sure you use big enough cable for GND & 3,3v,
Next use an adjustable resistor on CPU_RST and (in my case on falcon) target 16Ohm.
Then adjust Vcc output of your CPLD to exactly 1.65v (use an adjustable regulator diagram, regulator + adjustable resistor + 2 caps)
Make sure you have your motherboard in the metal case with the metal top on.
From over 3m boots to ~5sec boot on falcon

 

[socalbill]

I have Jaspers and falcons RGH2 glitching fine you just need to find the G-Spot :biggrin:

I guess I'll need a bigger soldering iron.