Team Xecuter Presents RGH 2.0 *NOW RELEASED*

Ubergeek

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Re: Team Xecuter Presents RGH 2.0

mrdrifta said:
Maybe he isnt an official reseller, he isnt listed on the where to buy page (i dont think he has a site?)

Idk his name, but i was given the email address: [email protected] from a guy i know. He sells wholesale replacement parts aswell as lots of tx stuff.

Said that he was a rep and was in direct contact, that it would be ready to ship in two weeks and, would give me a discount on multiple pieces if i paid this week... (guess i should have been skeptical by this last part:()

I've recieved small lots of stuff from him at good prices, guess thats why i never second guessed it.

Looks like i'm gonna be buying from the Where To Buy sellers from now on. Too bad there aren't more in New Zealand :(
Click to expand...
what do you need more for ?

We select resellers for a reason. Its not a free for all and any old business can get listed

http://www.lizardpcs.co.nz/ is who you should be using for NZ :)
 
  • Like
Reactions: prankster, Lizardpcs and mrdrifta
alexhore

alexhore

BANNED
Sep 16, 2011
60
0
Manchester, UK
Re: Team Xecuter Presents RGH 2.0

Im planning a re-build of my own personal RGH after lovely red lights.
Its currently running 14699 with a non-TX coolrunner (I bought as a temp solution).
While I will be fitting the TX-Coolrunner anyway am I best sticking to 14699 and RGH or updating to 14719 and RGH2.0.
I know it does not really matter as once its booted its all the same but perhaps for boot times is there an imporvment over the original hack?
I usualy get booted in about 10-15 seconds anyway I expect the use of a proper TX coolrunner to bring that down either way :)
 
Ubergeek

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Re: Team Xecuter Presents RGH 2.0

alexhore said:
Im planning a re-build of my own personal RGH after lovely red lights.
Its currently running 14699 with a non-TX coolrunner (I bought as a temp solution).
While I will be fitting the TX-Coolrunner anyway am I best sticking to 14699 and RGH or updating to 14719 and RGH2.0.
I know it does not really matter as once its booted its all the same but perhaps for boot times is there an imporvment over the original hack?
I usualy get booted in about 10-15 seconds anyway I expect the use of a proper TX coolrunner to bring that down either way :)
Click to expand...
You seem to be misunderstanding RGH2

if you already have your CPU key - what do you need RGh2 for ? :)
 
  • Like
Reactions: digiman
digiman

digiman

Senior Member
Nov 2, 2011
185
0
Re: Team Xecuter Presents RGH 2.0

This is what J-Runner's log said when i tried to make 14719 ECC for my Zephyr

Initializing Nand..
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.13
CB_A: 4575
CB_B: 4575
CD (image): 4575
CD (decrypted): 8453
Not supported yet

Will RGH2 support it?
 
Last edited:
2

2615863

VIP Member
Nov 30, 2011
552
33
Tampa,FL
Re: Team Xecuter Presents RGH 2.0

digiman said:
This is what J-Runner's log said when i tried to make 14719 ECC for my Zephyr

Initializing Nand..
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.13
CB_A: 4575
CB_B: 4575
CD (image): 4575
CD (decrypted): 8453
Not supported yet

Will RGH2 support it?
Click to expand...
Yes
 
  • Like
Reactions: digiman
digiman

digiman

Senior Member
Nov 2, 2011
185
0
Re: Team Xecuter Presents RGH 2.0

Thanks for the info, also i noticed my Coolrunner has a solid green light right now and can't boot my console at all untill i switch it to PRO then it will boot on stock dash, is this normal or did something fuse wise blew up?
 
C

ChefBoyArDizzl

Full Member
Mar 8, 2012
50
0
Re: Team Xecuter Presents RGH 2.0

digiman said:
This is what J-Runner's log said when i tried to make 14719 ECC for my Zephyr

Initializing Nand..
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.13
CB_A: 4575
CB_B: 4575
CD (image): 4575
CD (decrypted): 8453
Not supported yet

Will RGH2 support it?
Click to expand...
My zephyrs cb not supported at the moment either. I am also waiting for RGH 2.0 to come out. It says it supports all the phats. So I imagine that includes you too!
 
  • Like
Reactions: digiman
Ubergeek

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Re: Team Xecuter Presents RGH 2.0

digiman said:
This is what J-Runner's log said when i tried to make 14719 ECC for my Zephyr

Initializing Nand..
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.13
CB_A: 4575
CB_B: 4575
CD (image): 4575
CD (decrypted): 8453
Not supported yet

Will RGH2 support it?
Click to expand...
yes of course

Did you read the OP that explained what RGH2 is ?

---------- Post added at 13:52 ---------- Previous post was at 13:51 ----------
digiman said:
Thanks for the info, also i noticed my Coolrunner has a solid green light right now and can't boot my console at all untill i switch it to PRO then it will boot on stock dash, is this normal or did something fuse wise blew up?
Click to expand...
the switch setting is PRG and that disables the coolrunner

so if its booting ok with it disabled.....do the math
 
  • Like
Reactions: digiman
digiman

digiman

Senior Member
Nov 2, 2011
185
0
Re: Team Xecuter Presents RGH 2.0

Yes i did but i wasn't sure about the CD (decrypted): 8453 so i just wanted to make sure i didn't have a different Nand dump

---------- Post added at 10:56 ---------- Previous post was at 10:53 ----------
Ubergeek said:
yes of course

Did you read the OP that explained what RGH2 is ?

---------- Post added at 13:52 ---------- Previous post was at 13:51 ----------



the switch setting is PRG and that disables the coolrunner

so if its booting ok with it disabled.....do the math
Click to expand...
OK i just herd that if you update to stock dashboard and your efuses blow that you will be stuck on stock so i was worried when i saw that the coolrunner wasn't flashing anymore that my efuses blew. Did they Blow?
 
Last edited:
Ubergeek

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Re: Team Xecuter Presents RGH 2.0

digiman said:



OK i just herd that if you update to stock dashboard and your efuses blow that you will be stuck on stock so i was worried when i saw that the coolrunner wasn't flashing anymore that my efuses blew. Did they Blow?
Click to expand...
of course they blew - but what does it matter if you have the CPU Key ?
 
  • Like
Reactions: digiman
digiman

digiman

Senior Member
Nov 2, 2011
185
0
Re: Team Xecuter Presents RGH 2.0

yes but it is to late anyway they blew up after i updated to 14719. I just need to know if i can still boot from an ECC image and a Freeboot image (using RGH 2.0)
 
X

xblextreme

Re: Team Xecuter Presents RGH 2.0

Yep your awnser was at the begining of the thread. Codenamed RGH 2.0, new features introduced:

  • Hack now works on new CB's (14717/14719 update)
  • Hack now works with all Refurbished Split CB's (4577, 5772, 6752)
  • - Zephyr CB 4577, 4575
  • - Falcon/Opus CB 5772, 5773
  • - Jasper CB 6752, 6753
  • - Trinity (Slim) CB 9230 Also freeboot is for jtag's and glitch image is for rgh's
 
  • Like
Reactions: digiman
digiman

digiman

Senior Member
Nov 2, 2011
185
0
Re: Team Xecuter Presents RGH 2.0

OK thanks so this was from the Post by Xecuter he said:

As soon as you have your CPU KEY, and you are using an Xecuter DemoN you will ALWAYS be able to switch to a fully hacked NAND and it can never be stopped no matter what update you apply and no matter which efuses are blown!

I am not buying a DemoN so can i still boot ECC image and Freeboot image with my Rev A Coolrunner and blown efuses?
 
Last edited:
You must log in or register to reply here.