Team Xecuter RGX (inc DGX to RGX Conversion) *UPDATED*
- Thread starter Xecuter
- Start date
- Status
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
its working now , it wasn't 31 seconds ago ;p
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
So basically if I flash my DGX V1.0S with J-Runner and NAND-X using the 3 new .xsvf files for Coronas it should work amazingly as a glitch chip, correct?
There's a very stubborn Corona V3 sitting on my desk I can't get to boot properly all the times. Would it be an appropriate 'prey'?
So basically if I flash my DGX V1.0S with J-Runner and NAND-X using the 3 new .xsvf files for Coronas it should work amazingly as a glitch chip, correct?
There's a very stubborn Corona V3 sitting on my desk I can't get to boot properly all the times. Would it be an appropriate 'prey'?
really_wacky
VIP Member
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
Someone should start a results topic, so people can post there mobo types wire lengths cpu_rst point etc...
Im going to RGX my corona this evening im pretty excited
EDIT: For the debug LED to work you just solder a wire to D1?
Someone should start a results topic, so people can post there mobo types wire lengths cpu_rst point etc...
Im going to RGX my corona this evening im pretty excited
EDIT: For the debug LED to work you just solder a wire to D1?
Last edited:
Sounds like a great idea, I'll be doing my trinity later today.Someone should start a results topic, so people can post there mobo types wire lengths cpu_rst point etc...
Im going to RGX my corona this evening im pretty excited
EDIT: For the debug LED to work you just solder a wire to D1?
Last edited:
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
P.S: Yep I do
But how can I choose to flash with the new Corona files. I can't find that option anywhere in J-Runner.
P.S: Yep I do
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
The colours of the CR programming cable don't correspond to the DGX wiring. Are you able to explain a little further please?
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
Look at the dgx1.0s and trace the JTAG plug traces to their corresponding pin and solder the wires directly to that or something along those lines I'd imagine.......or maybe they will come up with an add-on board for the 1.1s....
Look at the dgx1.0s and trace the JTAG plug traces to their corresponding pin and solder the wires directly to that or something along those lines I'd imagine.......or maybe they will come up with an add-on board for the 1.1s....
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
the jtag pins on the coolrunners and the dgx are in the same order, so the coolrunner programming will work just fine for the 1.0
to flash the xsvf in jrunner, just go to advanced/custom nand/cr functions/ tick the xsvf button/ and select the file
the jtag pins on the coolrunners and the dgx are in the same order, so the coolrunner programming will work just fine for the 1.0
to flash the xsvf in jrunner, just go to advanced/custom nand/cr functions/ tick the xsvf button/ and select the file
Last edited:
TheGlow
VIP Member
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
Looking for a bit more clarification in regards to compatibility with the new phat hack.
Any clues whats the optimal glitcher? I have a rev C/demon Jasper already with up to 5 min boot times, a Xenon with dust and a phat, falcon/jasper, owner not sure, that I can have due to dvd read errors.
I know I'll need a JR Programmer since I wrote my nand with the Demon.
New glitch sounds like hardware isn't as critical, so older Rev C, DGX 1.1S or CR3 pros? Or is something else going to rear its head?
Looking for a bit more clarification in regards to compatibility with the new phat hack.
Any clues whats the optimal glitcher? I have a rev C/demon Jasper already with up to 5 min boot times, a Xenon with dust and a phat, falcon/jasper, owner not sure, that I can have due to dvd read errors.
I know I'll need a JR Programmer since I wrote my nand with the Demon.
New glitch sounds like hardware isn't as critical, so older Rev C, DGX 1.1S or CR3 pros? Or is something else going to rear its head?
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
I would assume you can flash the DGX 1.1 as well with soldering wires directly to the DGX 1.1
Steel City Mods
VIP Member
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
You mean fhe new unreleased phat hack? This isnt the thread to be asking about that. Just be patient and wait, itll be released soon enough.
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
Plugging in the DGX via NAND-X and hitting 'run', correct? I'll give a try after lunch
If RGX using short wires is as good as DGX booting XeLL in a Corona V3's, results will be great, that's for sure.
So basically jumping into this menu:
Plugging in the DGX via NAND-X and hitting 'run', correct? I'll give a try after lunch
If RGX using short wires is as good as DGX booting XeLL in a Corona V3's, results will be great, that's for sure.
Steel City Mods
VIP Member
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
Exactly what to do.So basically jumping into this menu:
Link To Image
Plugging in the DGX via NAND-X and hitting 'run', correct? I'll give a try after lunch
If RGX using short wires is as good as DGX booting XeLL in a Corona V3's, results will be great, that's for sure.
TheGlow
VIP Member
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
I get paid 2x a month, so If I don't order anything now, might be 15-30 days for next chance.
Woman be crazy.
Aye. It's just when there's money in the account, the wife burns through it.
I get paid 2x a month, so If I don't order anything now, might be 15-30 days for next chance.
Woman be crazy.
Re: Team Xecuter RGX (inc DGX to RGX Conversion)
Good,
Does that mean now any phat with latest dash can be glitched ?
Right ?
Good,
Does that mean now any phat with latest dash can be glitched ?
Right ?
- Status