RGH Temperatures in FSD

[jmelbourne]

Hi Guys,

Just wondered at what temperature in FSD do you start to worry and increase the fan speeds?

Thanks

John

 

[Ir0nman]

I have always thought anything in the 50-55C is average/normal anything above that I would put the fans up.

 

[Coleman]

Mine runs the same as ir0nmans between 50-55 with my fan set at 85%

 

[Wamphyri2b]

I keep the fans at 100% all the time anyway. A little noisy, but my temps stay between 40-50 most of the time & never go as high as 60.

Edit: Then again, it's getting hot where I live now so it's probably be getting up around 60 now.

 

[superspeed]

100% draws to much power and is not neede recomended is aboit 85%

 

[Wamphyri2b]

Maybe, maybe not. Every Jtag & RGH I've ever done has been set to 100% with fan speed flasher. Except for the slims, I've only done a couple slims though. No one has ever had a problem. Honestly, 85% is probably plenty. I've never had an issue with 100%, so that's what I use.

 

[axee44]

i just change target temps with 360 flash tool and leave fans on auto mode. why messing with manual speeds when this method serves the purpose??

 

[WalangAlam]

I've read from msoft forum that normal is 40-55. Mine is 40-45C.

 

[bonkers1973]

i run mine at 100% at all time and then i know that it is doing its very best to keep the console cool ....

 

[Utmad]

Mine runs at 50-55deg with the fans set to auto so I think i will leave alone.