TEMPLATE: HOW TO ASK FOR CR4 HELP

Status
Not open for further replies.

Xecuter

Staff member
Top TX Brass
Dec 6, 2002
11,465
128
Asia
team-xecuter.com
If you want assistance on your CR4 XL installation, you MUST post complete the following fields:

  • Console Type: Zephyr/Falcon/Opus/Jasper/Trinity/Corona v1, v2, v3, v4, v5, v6
  • Programmer Used: NAND-X, JRP v1.1, JRP v2.0
  • NAND Size: 16/256/512/4GB
  • Dashboard version: e.g 2.0.14699
  • CB Version: e.g 5771
  • Screenshot of NAND details from J-Runner: (attach an image to your post)
  • J-Runner log
  • updflash.bin log (if applicable)
  • Image of the CR4 XL
  • Images of close-up soldering to motherboard (attach images to your post)
  • Detailed Description of the Problem
  • Was the console working before you started: Y/N
  • Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y/N
  • How long is the light on for each time (be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).

Warning
POSTING FOR HELP WITHOUT THESE FIELDS COMPLETED MAY RESULT ON IT BEING DELETED WITHOUT WARNING.


We're trying to help you, so we need the important information up-front. Please help us to do this effectively!
 
Status
Not open for further replies.