Think i duffed a jasper

[AudioProUK]

Ok i made a noobie mistake and wired a couple points backwards on this jasper (its mine anyway , one of many lol ) . And now the thing is doing some weird thing with the power . I`ve put a lighted wisper fan on it to see what it`s up too and the fan is flashing like it would if it were glitching but 3 times a second WITH THE CHIP AND WIRING REMOVED. It`s obviously a power issue but just wondered if anyone else had done this and if there is a recognised part i`ve blown. i`ve cleaned all the solder points up so there is definately no short . I haven`t written the orig nand back yet but will in a sec .

 

[garageinc]

i don't think it would matter unless you wired the power up wrong on the coolrunner. if you already flashed the ecc files then it won't act normal without the chip installed i expect.

 

[AudioProUK]

naa i`ve removed everything flashed it back to stock and it`s giving a 0022 error but it`s just not acting like it should . It`s hard to describe , the best way to describe it is : i`ve got a fan with leds in . When it`s all working properly it flashes ever time it glitches , however this is flashing 3 times every second or there abouts with the orig nand and all wires removed . Somethings gone drastically wrong with it