LITEON DG-16D2S think I may x360usb pro is not detecting drives, please help!!!

[Plutonian78]

Hello,


not sure why is happening, but I updated firmware 0.18

and have read all,


start jungle flasher 1.92, and plug the ck3i and x360usb pro and drive properties says no drive detected


I have I/O address: 0x000
type USB
channel: Primary
position: master
device: xecuter x360usb pro (ver 0.18)

and where it says vendor no drive detected


and is been doing that with different drives

not sure if the x360usb pro gone bad, and needs to be replaced, or what is going on.

thanks

 

[DUSTYB3N]

Have you installed the drivers?


Sent from my iPhone 4S using Keyboard

 

[Plutonian78]

Computer/manage

device manager

libusb-win32 devices
x360usbpro

and ck3i also done

 

[BL4K3Y]

Is the CK3i powered on?

Can you eject the drive's tray?

 

[Plutonian78]

yes can eject the drive tray no problem

---------- Post added at 22:15 ---------- Previous post was at 22:14 ----------

should the portio light be red or green, cause right now I have 1 green and one red

 

[BL4K3Y]

Okay, this may sound trivial but have you tried another SATA cable?

"Never rule out the possibility of a faulty SATA cable" < a quote from the JungleFlasher PDF .

 

[Plutonian78]

have tried different sata cable still says this

 

[Plutonian78]

can anyone please shed me some light, or did the x360usb pro decided to go bad

 

[k0mpresd]

mine does not detect on occasion. i keep having to unplug and replug it to usb, then it detects. it will also crap out in the middle of writing sometimes and i have to do the same thing, unplug x360 and drive, then re-power and re-intro the drive. i am 99% sure this is an x360 problem as it just started randomly one day and has gotten worse. the device used to work 100%.

 

[curtispage]

Exact problem for me as above, was working fine flashing everything i threw at it, now it freezes occasionally during writing, unpluging it solves this but its getting worse for me aswell, might have to buy another one

 

[Plutonian78]

I will try in a different laptop tomorrow, if that won't work, I will have to return it, and get another one

 

[Plutonian78]

I never thought this x360usb pro goes bad, whats the warranty on this things, I don't have mine for long.

 

[hilly360]

have you tried clicking the box with the 3 dots in it? next to 0x0000 box.

 

[djxxx]

maybe you have screwed up ya pc somewhere down the line...Best bet is to re-install windows and start again.....

 

[Plutonian78]

I have bought a new x360usb jungle special edition,


but I mess up

instead of going first to DVDkey 32

I went to MTK Flash 32

I clicked the 3 dots after the 0x0000


think my drive is in vendor mode and I can't put it back to outro

can someone help me, before was detecting the drive and now is saying no drive detected, I can't open the drive using CK3i and I can put it to 0x72


Please help

 

[rdubbs007]

I have bought a new x360usb jungle special edition,


but I mess up

instead of going first to DVDkey 32

I went to MTK Flash 32

I clicked the 3 dots after the 0x0000


think my drive is in vendor mode and I can't put it back to outro

can someone help me, before was detecting the drive and now is saying no drive detected, I can't open the drive using CK3i and I can put it to 0x72


Please help

Did you get your key / dummy.bin

 

[Plutonian78]

got a Lite-OFW.bin

but said parse failed

and something mtk

I try to read it on vendor mode with mtk flash 32

instead of dvdkey 32

when I try to use this does not seem to work

 

[rdubbs007]

Do you at least have a key?

 

[Martin C]

Does your DVD drive work in your console right now?

 

[Plutonian78]

have not yet test it, I have the key numbers, but I can't put it on the Firmware tool

---------- Post added at 16:08 ---------- Previous post was at 15:58 ----------

Just tested the dvd drive and E64 , before was normal

---------- Post added at 16:12 ---------- Previous post was at 16:08 ----------

Loading firmware file C:\Users\Dell studio\Documents\The Vault\JungleFlasher v0.1.92 Beta (304)\firmware\Dummy.bin\Tony\Lite-OFW.bin
MD5 hash: 09a1d434dbd7197e7c3af8a7c28ca38b
Parse Failed !

I got the key but not the file.

it does not load, please help, as of right now the drive when connected to the xbox the E64 appears, and no drive detected on mtk flash 32 and dvdkey 32