Martin C
VIP Member
LITEON DG-16D2S think I may x360usb pro is not detecting drives, please help!!!
- Thread starter Plutonian78
- Start date
rdubbs007
VIP Member
If you have a spare liteon make firmware with this key and write it to that drive and test it in the box to make sure it is the correct key.
Well that's what it gave me when I clicked on the Tab MTK Flash 32
then I clicked on the 3 dots after 0x0000
then the drive appeared as FW 02150C then I click on Lite-On erase, turned off the ck3i then back on, and went on vendor mode 0x72
then I clicked on read, and was reading then asked me to save this file Lite-OFW.bin,
I saved it, then on the log said parsed fail
and since then it has showed after I clicked on the 3 dots drive not detected.
I think the drive is still in vendor mode, that's why when I plug in into the console it shows E64
I try to click outro many times, and still says drive not detected.
---------- Post added at 16:51 ---------- Previous post was at 16:50 ----------
I don't have a spare liteon
then I clicked on the 3 dots after 0x0000
then the drive appeared as FW 02150C then I click on Lite-On erase, turned off the ck3i then back on, and went on vendor mode 0x72
then I clicked on read, and was reading then asked me to save this file Lite-OFW.bin,
I saved it, then on the log said parsed fail
and since then it has showed after I clicked on the 3 dots drive not detected.
I think the drive is still in vendor mode, that's why when I plug in into the console it shows E64
I try to click outro many times, and still says drive not detected.
---------- Post added at 16:51 ---------- Previous post was at 16:50 ----------
I don't have a spare liteon
rdubbs007
VIP Member
The drive is not in vendor mode, it is erased. With the drive off, click intro, then turn it on. It will detect.
So I erased the key before reading it, and the only way to retrieve the key is to RGH the console, ok, is it cheapper to RGH a console than to buy a second hand one, Please help, thanks
hilly360
VIP Member
did you not follow a tut? once you get the drive visable on ur pc/laptop always follow JF tut or TX tut.
i always follow TX tuts.
http://www.team-xecuter.com/forums/forumdisplay.php?f=136
easier to understand imho.
i always follow TX tuts.
http://www.team-xecuter.com/forums/forumdisplay.php?f=136
easier to understand imho.
You should have retrieved the key from the drive with probe v3 Before erasing. Now unless you have it saved from a previous flash the only way tk get it back is rgh
Never flash or erase a drive unless you have the drive key ect first
Sent from my GT-I9000 using Tapatalk
Never flash or erase a drive unless you have the drive key ect first
Sent from my GT-I9000 using Tapatalk
