This lite on will not write new firmware

drumr7123

Full Member
Dec 3, 2011
47
0
I already have extracted the DVD key with my probe and every time I try to write it it says writing bank 0 with one dot and freezes then windows says my usb device has malfunctioned (irritating). I have a CK3i Pro and a X360 USB Pro v1 and also v2, it won't work with either, I have it plugged into a SATA port in my beefy computer and ive tried the CK3i with a USB 3.0 port so it is definitely not a power issue. I've tried steps to unbrick it if it was bricked but no luck. Here is the log:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.95 Beta (321)
Session Started Sat Aug 08 14:50:21 2015


This is a Wow 64 process running on 8 x 64 bit CPUs
X360USB PRO detected, Version 0.20


Found 1 I/O Ports.
Found 1 Com Ports.
Found 6 windows drives C: D: E: F: G: I:
Found 2 CD/DVD drives E: F:


Loading firmware file C:\Users\Prodigy\Desktop\J-Runner v3 (5) Core Pack\Jasper 16\Dummy.bin
MD5 hash: 41596992f4fee4b6315793a35536db9d
Inquiry string found
Identify string found
Drive key @ 0xA030 971558AA61A43689415DE90906D24B06
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Auto-Loading firmware file C:\Users\Prodigy\Desktop\JungleFlasher v0.1.95 Beta (321)\firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches


Target rev is LT 02510C, serial info not copied
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
................
Serial flash found with Status 0x72


Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes


Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x0
.....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes


Getting Status from port 0x0000
SPi flash found with Status 0x72


Sending Chip Erase to Port 0x0000
Erasing:Writing target buffer to flash
Writing Bank 0: .

At this point it says my USB device has malfunctioned and it stops or just sits there. I've reinstalled drivers over and over for all 3 of them, I already have the DVD key dummy extracted, the drive always gives status 0x000 instead of x90

I have windows 10 professional and I run the OS to run unassigned drivers and before this one, I was able to easily flash a BenQ drive.

Any help would be appreciated!