RGH Tip for noobs like me if you have freezing troubles

K

kotmfu

Junior Member
Jun 19, 2011
19
0
Melbourne, Australia
If you are having some trouble after you put your xbox back together with freezing and you cant figure out why, have a look at the position you put your wires in. you see those brown circles around the screen holes? if you stick your wires near that when you screw the case back together they WILL be squished. i just did this and spent 20 minutes figuring out why my xbox wasnt working after i stuck the case back together and i didnt even think about that.... so yeah just a quick tip :p
 
  • Like
Reactions: tennisdude516
K

kotmfu

Junior Member
Jun 19, 2011
19
0
Melbourne, Australia
frayed said:
just curious but why would you not use the hole used in the tutorial?

http://www.team-xecuter.com/forums/showthread.php?t=74857
Click to expand...
im not talking about which hole you put the wire through, more where its positioned when you run it from that hole to the solder point (in this case the b point). i accidentally ran mine over the bit that is raised on the metal casing and it squished the wire. i run it through the point where its suggested on the tutorial, it would be stupid to run it through the screw hole as thats where the screw goes! :p
 
K

kotmfu

Junior Member
Jun 19, 2011
19
0
Melbourne, Australia
frayed said:
either way, in the tutorial pics i do not see the wires run anywhere near the screw holes, but thanks for the tip
Click to expand...
it was in my effort to keep it away from the loops on the top of the mother board (the ones that cause the startup problems if the wires run underneath them) and i just didnt move them down enough
 
You must log in or register to reply here.