tittle Flash Config: 0x00000000 trinity

sanic

Junior Member
May 3, 2017
11
1
Hello guys im new here and im stuck im i got up to creating ecc and from there nothing worked
m xbox doesn't even start anymore it will make the start sound but fan isent spinning and nothing on screen


here is the log
Code:
Friday 28 april 2017 20:34:20


J-Runner v0.3 Beta (8) Started








Connection Error
Checking Files
Connection Error
Version: 10
Flash Config: 0x00000000
Can not Continue
Glitch2 Selected
Version: 00
Wrong Version.
Trinity Manually Selected




==================================================  =
Friday 28 april 2017 20:40:05




J-Runner v0.3 Beta (8) Started








Connection Error
Checking Files
Connection Error
Glitch2 Selected
Version: 00
Wrong Version.
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\jeff\Desktop\J-Runner v3 (5) Core Pack\test\output\nanddump1.bin
Reading Nand
Done!
in 3:22 min:sec




Reading Nand to C:\Users\jeff\Desktop\J-Runner v3 (5) Core Pack\test\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Nand Initialization Finished
Reading Nand
Done!
in 3:21 min:sec




Comparing...
Nands are the same
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue




==================================================  =
Friday 28 april 2017 20:59:34




J-Runner v0.3 Beta (8) Started








WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Connection Error
Checking Files
Connection Error
Glitch2 Selected
Retail Selected
Glitch2 Selected
Initializing nanddump1.bin..
Trinity
Nand Initialization Finished
Programming Coolrunner
C:\Users\jeff\Desktop\J-Runner v3 (5) Core Pack\common\xsvf\trinity.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: C:\Users\jeff\Desktop\J-Runner v3 (5) Core Pack\common\xsvf\trinity.xsvf
Sending Out Packets .........
Success
Retail Selected
Glitch2 Selected




==================================================  =
Friday 28 april 2017 22:08:24




J-Runner v0.3 Beta (8) Started








WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Connection Error
Checking Files
Connection Error
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
ECC created
ECC created
Version: 10
Flash Config: 0x00000000
Can not Continue
ECC created
Comparing...
0x0000
0x0002
0x0003
0x0004
0x0005
0x0006
0x0007
0x0008
0x0009
0x000A
0x000B
0x000C
0x000D
0x000E
0x000F
0x0010
0x0011
0x0012
0x0013
0x0014
0x0015
0x0016
0x0017
0x0018
0x0019
0x001A
0x001B
0x001C
0x001D
0x001E
0x001F
0x0020
0x0021
0x0022
0x0023
0x0024
0x0025
0x0026
0x0027
0x0028
0x0029
0x002A
0x002B
0x002C
0x002D
0x002E
0x002F
0x0030
0x0031
0x0032
0x0033
0x0034
0x0035
0x0036
0x0037
0x0038
0x0039
0x003A
0x003B
0x003C
0x003D
0x003E
0x003F
0x0040
0x0041
0x0042
0x0043
0x0044
0x0045
0x0046
0x0047
0x0048
0x0049
0x004A
0x004B
0x004C
0x004D
0x004E
0x004F
Initializing nanddump1.bin..
Trinity
Nand Initialization Finished
Comparing...
Nands are the same
ECC created
ECC created
ECC created
Version: 10
Flash Config: 0x00000000
Can not Continue
ECC created
ECC created
ECC created
Version: 10
Flash Config: 0x00000000
Can not Continue
ECC created
ECC created
ECC created
Version: 10
Flash Config: 0x00000000
Can not Continue
ECC created
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000

also tried this video but it did not work


[video=youtube_share;TkE9bqU76sU]https://youtu.be/TkE9bqU76sU[/video]


tried to program the coolruner rev c again but now i get this


Code:
Version: 10Flash Config: 0x00000000
Can not Continue
Programming Coolrunner
C:\Users\jeff\Desktop\J-Runner v3 (5) Core Pack\common\xsvf\trinity.xsvf
USB XSVF Player Initialized
Xilinx Device ..... [NOT DETECTED]



here are the pictures of my soldering work note C and D where in the right place but i was trying to find out why i had this problem but than C and D broke off i had to put it on the alternate points im wating for my postfix adapter v2 when will it arrive :/


i have a feeling i bricked it if read about shorting 2 wires but that was it i only found that but i hope u guys can help


thx anyway`s


p.s if i get the post fix adapter v2 do i need to solder it in port number 5 with the trinity?
 
Last edited:

sanic

Junior Member
May 3, 2017
11
1
ugg ofcours wrong thread needed to go to J-Runner Official Support sorry about that i cant remove or move this thread
 

gavin_darkglide

VIP Member
Dec 14, 2012
2,311
118
I would short the data pins on the nand together, on power on. works everytime I have ever had this problem. You could also use a demon to fix this.
 

Lizardpcs

VIP Member
Mar 3, 2011
335
33
I would check your soldering of the wires from your programmer to your motherboard cause looking at that log you had a lot of nand reading and detection problems
 

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,368
128
I would never advise someone to just short things on a motherboard when they're clearly inexperienced. From what I can recall, you're only one or two pins away from frying the nand?

I can't see the images, might be the crappy internet I have here on a beach in Bali.
 

sanic

Junior Member
May 3, 2017
11
1
I would short the data pins on the nand together, on power on. works everytime I have ever had this problem. You could also use a demon to fix this.
Can u provide a picture or a link? Thx for answering


I would never advise someone to just short things on a motherboard when they're clearly inexperienced. From what I can recall, you're only one or two pins away from frying the nand?

I can't see the images, might be the crappy internet I have here on a beach in Bali.
enjoy the beach haha
Also yea kinda inexperience i had solderd cabels old radios that where broken but the xbox 360 solder points are a lot smaller haha also thx for answering
 
Last edited:

BrockThunderjam

VIP Member
Jun 25, 2013
1,504
88
Without seeing pictures I'll pull out my crystal ball and say you damaged the stdby_clk.
 

sanic

Junior Member
May 3, 2017
11
1
yeah you damaged stdby clk.
http://team-xecuter.com/forums/threads/140222-STBY_CLK-damaged
so it wont start because the pad is off that pad was connected to the resistor now i have to scrape it off and solder it together than the xbox will start :eek: ?
 

BrockThunderjam

VIP Member
Jun 25, 2013
1,504
88
You are scraping the wrong trace.....you should probably get it to someone who knows what they're doing.

regfix05.jpg

HD6YdFq.png
 
Last edited:

sanic

Junior Member
May 3, 2017
11
1

BrockThunderjam

VIP Member
Jun 25, 2013
1,504
88
I think it's time you post some photos of your entire install.
 

sanic

Junior Member
May 3, 2017
11
1
coolrunner rev c and postfix adapter v2

http://i.imgur.com/XTOorlA.jpg

nand wires

http://i.imgur.com/2KtM4lkg.jpg
http://i.imgur.com/HFoiR7B.jpg

the fix of pad

http://i.imgur.com/xGOktxW.jpg

B and D wire

http://i.imgur.com/1WM6hto.jpg

i used the alternate point of B FT3N2

http://i.imgur.com/lQdDIKrg.jpg

jr programmer V2

http://i.imgur.com/mKSsE7Hg.jpg

http://i.imgur.com/Dn20VPbg.jpg


than i start j runner get the nands that i read before all this happend chek then they are good create ecc write ecc and i get the error

Friday 5 mei 2017 00:22:37


J-Runner v0.3 Beta (8) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Connection Error
Checking Files
Connection Error
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00000000
Can not Continue




btw thx for helping me for this long i appreciate that :smile: