To All who are Reset Glitching

[spookyman166]

I have seen many threads where software is the issue!

People cant create freeboot images, ecc files, getting CPU incorrect...

Please for the love of god: USE JTAG TOOL, it is pretty much idiot proof!!

Find it here: http://team-xecuter.com/forums/showthread.php?t=54178

AND please watch these videos: team-xecuter.com/forums/showthread.php?t=62715

The information is here JUST PLEASE USE IT... Too many have f**ked up, blame coolrunner and then get shunned. Save yourself some embarrassment.

ALSO if you have never soldered/cant/dont use flux/are an idiot(denial is first step)/rush things/dont think/haste full... JUST PAY SOMEONE TO DO IT!! DONT RISK AN EXPENSIVE CONSOLE!!!

Special thanks to coolshrimp... You are the Man... TX and all other hackers too... gli, trios, c4,TJ, geremia, matrix, max

 

[fersy]

I have seen many threads where software is the issue!

People cant create freeboot images, ecc files, getting CPU incorrect...

Please for the love of god: USE JTAG TOOL, it is pretty much idiot proof!!

Find it here: http://team-xecuter.com/forums/showthread.php?t=54178

AND please watch these videos: team-xecuter.com/forums/showthread.php?t=62715

The information is here JUST PLEASE USE IT... Too many have f**ked up, blame coolrunner and then get shunned. Save yourself some embarrassment.

ALSO if you have never soldered/cant/dont use flux/are an idiot(denial is first step)/rush things/dont think/haste full... JUST PAY SOMEONE TO DO IT!! DONT RISK AN EXPENSIVE CONSOLE!!!

Special thanks to coolshrimp... You are the Man... TX and all other hackers too... gli, trios, c4,TJ, geremia, matrix, max

Haha nice

 

[riget]

But it's not up to date, and don't think it's going to be

 

[BL4K3Y]

Those front end GUIs never work out for me....

I have yet to have issues with Python (for building ECC) and XeBuild, they work every single time .

 

[ishockin]

Jtag tool isn't updated for the new dash though

 

[BL4K3Y]

I have yet to have issues with Python (for building ECC) and XeBuild, they work every single time .

That works a treat each and every time, XeBuild allows you to build FreeBOOT using the 14699 kernel .

 

[Martin C]

I would say the opposite.

DO NOT USE JTAG TOOL.

I have had issues where the ecc was the wrong build.

If you rely on pretty GUI graphics to do everything then if/when it goes wrong, you don't have a clue what do to about it and invariably come here to ask for help on it.

Learn the commands to read/write the NAND. Run through multi_builder twice. First time without cpu key (as you won't have it) and again with (for the RGH image). Write to the console and you're done.

It's not rocket science and if you're having issues with typing in commands, maybe you shouldn't be opening a games console.

 

[xbox360 hacker]

I would say the opposite.

DO NOT USE JTAG TOOL.

I have had issues where the ecc was the wrong build.

If you rely on pretty GUI graphics to do everything then if/when it goes wrong, you don't have a clue what do to about it and invariably come here to ask for help on it.

Learn the commands to read/write the NAND. Run through multi_builder twice. First time without cpu key (as you won't have it) and again with (for the RGH image). Write to the console and you're done.

It's not rocket science and if you're having issues with typing in commands, maybe you shouldn't be opening a games console.

Agreed. Best advice i can think is if in doubt hunt a pro out

 

[Goldensavage]

I only use Multibuild and command line now

Command line is by far and away the best way to ensure that everything is written to the nand correctly. So easy

 

[playingmax]

I have seen many threads where software is the issue!

People cant create freeboot images, ecc files, getting CPU incorrect...

Please for the love of god: USE JTAG TOOL, it is pretty much idiot proof!!

Find it here: http://team-xecuter.com/forums/showthread.php?t=54178

AND please watch these videos: team-xecuter.com/forums/showthread.php?t=62715

The information is here JUST PLEASE USE IT... Too many have f**ked up, blame coolrunner and then get shunned. Save yourself some embarrassment.

ALSO if you have never soldered/cant/dont use flux/are an idiot(denial is first step)/rush things/dont think/haste full... JUST PAY SOMEONE TO DO IT!! DONT RISK AN EXPENSIVE CONSOLE!!!

Special thanks to coolshrimp... You are the Man... TX and all other hackers too... gli, trios, c4,TJ, geremia, matrix, max

jtag tool is not the best tool to use.

 

[dannyperez]

right now, i think its only good for reading nand dumps, theres to many issues trying to use it for anything else.

 

[trippy86]

Multibuild and command line all the way!

no offence but OP needs to think more clearly before he posts rubbish.

yes its a very good app for certain things but is nowhere up to date and if im not mistaken it wont be anytime soon.

stick with Multibuild and command line, use provided tutorials for this if you need to. I use this on every console i have done with 100% success

 

[spookyman166]

Everyone who says they dont use it are the pros.... They are experienced. I dont use it either, its too slow... But for a one time noob it will do the trick....

 

[Martin C]

..until it builds the ecc wrong and you end up messing about with other things trying to get it to work..

Bottom line is this - if you don't know how to type a few command lines (3 I think), you have no business modifying consoles.

Nandpro and multi-builder is all you need and they both work exactly as they're supposed to.

 

[rdubbs007]

..until it builds the ecc wrong and you end up messing about with other things trying to get it to work..

Bottom line is this - if you don't know how to type a few command lines (3 I think), you have no business modifying consoles.

Nandpro and multi-builder is all you need and they both work exactly as they're supposed to.

I second this. The more control you have over what is being put together throughout the process, the less likely it is that it will fail after flashing. And if you cannot type a few commands in (albeit copy and paste them ffs) then you DONT have any business in this business. Period.

 

[trippy86]

..until it builds the ecc wrong and you end up messing about with other things trying to get it to work..

Bottom line is this - if you don't know how to type a few command lines (3 I think), you have no business modifying consoles.

Nandpro and multi-builder is all you need and they both work exactly as they're supposed to.

I agree

 

[2615863]

Use NandHealer, I like CMD and Python myself, But I tried it once and seems really nice..

 

[gargoyle67]

I've done 3 consoles now 2xphats and one slim, I use cmd to dump the nand (jtag tool dumps the whole nand every time) multi-builder to xell\build glitch file, Jtag tool to write the glich file back to nand and also program the coolrunner. Hay I',m an equal opportunist what can I say :tongue:

 

[ll4sheezy]

..until it builds the ecc wrong and you end up messing about with other things trying to get it to work..

Bottom line is this - if you don't know how to type a few command lines (3 I think), you have no business modifying consoles.

Nandpro and multi-builder is all you need and they both work exactly as they're supposed to.

I agree with this also

 

[bandit123]

I would say the opposite.

DO NOT USE JTAG TOOL.

I have had issues where the ecc was the wrong build.

If you rely on pretty GUI graphics to do everything then if/when it goes wrong, you don't have a clue what do to about it and invariably come here to ask for help on it.

Learn the commands to read/write the NAND. Run through multi_builder twice. First time without cpu key (as you won't have it) and again with (for the RGH image). Write to the console and you're done.

It's not rocket science and if you're having issues with typing in commands, maybe you shouldn't be opening a games console.

sh*t hot advise there Martin C i started to get into the GUIs and lerned the hard way

Nowt beats a good old cmd prompt guess that an age thing though these young uns probs dont even know about DOS commands and stuff like installing windows 98 using 50 floppy disks lmao ahhhhh the good old days