GENERAL Tried to update stock NAND on demon via USB and now no video

[JohnWestBear]

You mean that bit of card people use as bit of roach for rollups or use it to pick sh*t out there teeth. Most people I swear just follow other guides or sh*tty youtube videos and we get to see the devistation. Some people just make my blood boil by how noobish they can be.

I may start a plumbing course so I can go fix cars

Lol anyways E76 error on stock .....

Can you show your process for building your retail NAND?? I suspect the issue lies within this homemade NAND. Really should have flashed back stock, updated, taken new dumps and then started with this would have saved you all this hassle.

 

[DreamZ]

Wiring up for rgh2 and increasing you ldv accordingly would get your freeboot image booting again from demon.

Martin asked you if you have tried xell.

Have you tried writing the ecc for 14719+ to demon and try glitching to xell?

 

[ExBoxHax]

Lol anyways E76 error on stock .....

Can you show your process for building your retail NAND?? I suspect the issue lies within this homemade NAND. Really should have flashed back stock, updated, taken new dumps and then started with this would have saved you all this hassle.

I built the retail nand from the original 13599 dump, I selected "retail" in jrunner and dash 16203 and hit create. And I was on stock 13599 I was trying to update to 16203 via USB.

Ok let me put it like this...I have a working dual nand, hacked image 16203 on demon and stock 13599 on motherboard....How should I update it?

 

[BrockThunderjam]

You can update the stock nand with XBL or by downloading the update and using a thumb drive.

 

[ExBoxHax]

Wiring up for rgh2 and increasing you ldv accordingly would get your freeboot image booting again from demon.

Martin asked you if you have tried xell.

Have you tried writing the ecc for 14719+ to demon and try glitching to xell?

yes it was trying to glitch xell on the demon side but now I'm getting no power at all. I think my rf board port came loose, has anyone seen this before because now I can't even power up with the controller.

 

[JohnWestBear]

yes it was trying to glitch xell on the demon side but now I'm getting no power at all. I think my rf board port came loose, has anyone seen this before because now I can't even power up with the controller.

That made no sense. Have you got lights on the RF board? Do you have a working stock retail NAND now that boots? Those are just 2 questions I have at the moment.

 

[DreamZ]

I built the retail nand from the original 13599 dump, I selected "retail" in jrunner and dash 16203 and hit create. And I was on stock 13599 I was trying to update to 16203 via USB.

Ok let me put it like this...I have a working dual nand, hacked image 16203 on demon and stock 13599 on motherboard....How should I update it?

the normal route would be to update the stock nand officially, i.e going on xbox live / usb. then upping your LDV value on the glitched nand to match fuses.

also you need to stop.....
no offense just please stop.
send thism ess to someone, maybe sit with them and let them walk you through what there doing.

now its not powering on? LOL

almost 50 posts in and you should of taken it to someone in the first place due to lack of understanding.
a few people have told you and that big old card should of been a slap in the face for ya aswell.

 

[ExBoxHax]

That made no sense. Have you got lights on the RF board? Do you have a working stock retail NAND now that boots? Those are just 2 questions I have at the moment.

no lights on the rf board nothing happens when I try to power on. I have a working stock retail NAND but I'm getting e76 with it flashed to the motherboard. or was before it stopped powering on

 

[JohnWestBear]

no lights on the rf board nothing happens when I try to power on. I have a working stock retail NAND but I'm getting e76 with it flashed to the motherboard. or was before it stopped powering on

Check PSU see if it has a red light on it.

As everyone else has already said you've effectively got an LDV mismatch.

Take a screenshot of the NAND you've built in Jrunner what's the LDV value?

 

[Antalpromille]

the normal route would be to update the stock nand officially, i.e going on xbox live / usb. then upping your LDV value on the glitched nand to match fuses.

Only if its a realy old FreeBOOT image, otherwise theres no need to update it just to get a matching LDV on the glitch side.

 

[DreamZ]

Only if its a realy old FreeBOOT image, otherwise theres no need to update it just to get a matching LDV on the glitch side.

i know, was just explaining the general way of updating

he still needs someone to look at this for him. its way over his head

 

[frayed]

the normal route would be to update the stock nand officially, i.e going on xbox live / usb. then upping your LDV value on the glitched nand to match fuses.

also you need to stop.....
no offense just please stop.
send thism ess to someone, maybe sit with them and let them walk you through what there doing.

now its not powering on? LOL

almost 50 posts in and you should of taken it to someone in the first place due to lack of understanding.
a few people have told you and that big old card should of been a slap in the face for ya aswell.

bully

 

[CarpeDiem]

YOU'RE a big ol' card...

 

[nofeloniesyet]

all these responses and i dont think i seen anyone ask y hes wiring up nandx and using that when he has a demon installed.

 

[ExBoxHax]

Check PSU see if it has a red light on it.

As everyone else has already said you've effectively got an LDV mismatch.

Take a screenshot of the NAND you've built in Jrunner what's the LDV value?

psu light is normal and original and retail image both have ldv 0, 1st image is original 2nd is retail

 

[BrockThunderjam]

Don't worry about LDV. It's not a factor with new glitch images. Ignore that comment.

 

[JohnWestBear]

I can't see much as I'm on my phone but your LDV looks like 8 to me? It would be higher then this on 16203

 

[JohnWestBear]

Don't worry about LDV. It's not a factor with new glitch images. Ignore that comment.

This is for his retail side.

You still want to ignore it?

 

[BrockThunderjam]

This is for his retail side.

You still want to ignore it?

I was referring to the comment regarding matching his demon nand and retail nand ldv values. Didn't see he botched his update and was dealing with the retail nand ldv. No need to be testy.

 

[ExBoxHax]

and this is the point that broke on the rf board