DGX Trinity 0032

[Nintendo]

Hey there, i bought a preowned Trinity, i flashed Xell, then i installed the DGX (converted to RGX) and XeLL appeared, so i have the CPU Key, i tested yesterday morning if the console booted XeLL, and it worked, so i left home with the console turned off but with the PSU connected, when i returned, the cpu was resetting four times each second, so i desoldered the DGX and i flashed the stock nand, and now i got the 0032 error, maybe someone turned it on accidentaly, or the console itself, but it worked and now it doesn't, the CPU_RST trace is intact, but when i was desoldering the DGX, the CPU_RST wire was nearly out of the C5R11 pad (if it matters). Here are the pictures of the CPU_RST trace and from the back side of the CPU where i read that someone was having the same issue and the problem was a damaged resistor.

Have a nice day.

http://i.imgur.com/tvj5TdT.jpg
http://i.imgur.com/d9fGbUl.jpg
http://i.imgur.com/ggbdC8y.jpg

 

[glitched_one]

0032 usually broken cpu rst line or sb needs replacing.take a multimeter,and test for continuity before and after c5r11 pad.sometimes the pads can look fine,but still be broken,multimeter wont let ya down here.

 

[Nintendo]

0032 usually broken cpu rst line or sb needs replacing.take a multimeter,and test for continuity before and after c5r11 pad.sometimes the pads can look fine,but still be broken,multimeter wont let ya down here.

Thank you, my multimeter makes a sound when i touch C5R11 and FT4R2.

Now, i removed the heatsink and i saw this (the picture) that ¿Resistor?(R5C2) is blown and i havn't even touched it with the soldering iron, i tried to fill it with solder but still 0032
http://i.imgur.com/u2Fk5tT.jpg

 

[Nintendo]

Can someone tell me the value of that resistor?
Thanks all.