ANSWERED Trinity Boots Glitch fine but will not boot Stock NAND

[piecinitup]

I hope I labeled this thread correctly.

Let me give a background: I purchased an RGH Slim (trinity) back in June from a guy on here knowing that at some point I would want to do a dual nand in the future. That time came and I had the DemoN installed by a local guy since i've never soldered anything in my life. The problem he ran into was I had no retail dump for this console to begin with, so he couldn't get a stock nand onto the 360 side to boot. The glitch boots fine with the Demon activated. I decided to get my console back and give it a go myself. My question is, am I SOL without the original dump or is it possible to get this working? The guy that was helping me said he tried 30+ times still with no success.

Thanks guys

 

[BL4K3Y]

Unless you can find the original NAND dump or at the very least, the original key vault, you will not get a retail NAND working on that system.

Have you tried building a retail image using a donor (clean) SMC and the key vault from the glitch image?

 

[piecinitup]

Unless you can find the original NAND dump or at the very least, the original key vault, you will not get a retail NAND working on that system.

Have you tried building a retail image using a donor (clean SMC) and the key vault from the glitch image?

Yes this is what we tried multiple times. Thanks. I will try and contact the guy again that I bought it from to see if he has original KVs

 

[janam4u]

any luck having the same problem