here the problem i got some body rgh my trinity and when i took home it boot up and go to the xbox menu then it freeze after that i unplug the system then turn it back on, the system wont boot any more. Until now i open it up and check all there wiring, seem everything work fine i don't see any wire lose. i try to mess with the blue wire coil around and do everything possible can and still wont boot. The problem now is it boot red light on green light flashing ever 4-5 second and continue doing that for hours seem to me is not booting any more. Can Any one Help????:frown:
Trinity cr ver c wont boot console
- Thread starter Thanhoadai
- Start date
jtag360.nl
VIP Member
is not
the member from this site, i call and he couldn't not fix the problem, the last time i try here what the result i get but after that i can't even boot, all i get was flashing green light ever 5 second and red light.
the member from this site, i call and he couldn't not fix the problem, the last time i try here what the result i get but after that i can't even boot, all i get was flashing green light ever 5 second and red light.
Martin C
VIP Member
With a rev c I would expect prolonged boot times, have you tried turning it on and coming back like 20 minutes later? it could just be bad glitch timing. If i were you I would switch out the Rev C with a Slim Proto V2. Much better boot times. I would also try flashing back stock nand, and make sure this isnt an issue with something else. If you get RROD on stock, something is wrong.
Last edited:
BL4K3Y
VIP Member
Exactly what he said.
The XCGPU is the slim's CPU/GPU - you need to remove this from the board, "reball" it with new solder balls and then re-attach it to the board.
There are people on the forum who offer this service - check the modder's services section.
The CPU/GPU Chip under the FAN, i faced this problem before don't waste your time to reflow it will give you nothing i suggest you to reball it for perma fix