RGH Trinity CR4 XL + Demon wont boot with second nand

Nicram

Noob Account
Nov 5, 2017
6
0
The green light is flashing but the cr4 xl wont glitch. My soldering looks ok and I have tried every postbit jumper with many dip settings. I have repeated the task of reading the nand from the xbox, creating an ECC and writing the ECC to the demon several times. The XBox Boots normally when I toggle the NAND, although I have to unplug it from the power when I try to glitch it. I also checked the cables of the CR4 with a Multimeter and they are fine.

This is my console log in JRunner v0.3 Beta (7):
===================================================
Sunday, November 05, 2017 12:30:26 PM

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Glitch2 Selected
Current: DemoN
Switching to XBOX
Current: DemoN
Switching to XBOX
Current: XBOX
Switching to DemoN
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump1.bin
Cancelled
Current: DemoN
Switching to XBOX
Current: DemoN
Switching to XBOX
Current: DemoN
Switching to XBOX
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump1.bin
XBOX360
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 1:47 min:sec

Initializing nanddump1.bin..
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump2.bin
Trinity
Nand Initialization Finished
Cancelled
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump1.bin
XBOX360
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 1:34 min:sec

Initializing nanddump1.bin..
Trinity
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump2.bin
Nand Initialization Finished
Reading Nand
Done!
in 1:37 min:sec

Comparing...
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump3.bin
Reading Nand
Nands are the same
Done!
in 1:26 min:sec

Comparing...
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump4.bin
Reading Nand
Nands are the same
Done!
in 1:02 min:sec

Comparing...
Nands are the same
Current: XBOX
Switching to DemoN
ECC created
Current: DemoN
Switching to XBOX
ECC created
Current: DemoN
Switching to XBOX
Current: XBOX
Switching to DemoN
Current: DemoN
Switching to XBOX
ECC created
Current: XBOX
Switching to DemoN
DEMON
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:15 min:sec

Power On
Power off
Power On
Power off
Current: DemoN
Switching to XBOX
Power On
Power off
Current: XBOX
Switching to DemoN
Power On
Power off
Current: DemoN
Switching to XBOX
Power On
Power off
Current: XBOX
Switching to DemoN
Current: DemoN
Switching to XBOX
Current: XBOX
Switching to DemoN
Current: DemoN
Switching to XBOX
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Current: XBOX
Switching to DemoN
Power On
Power off
Power On
Power off
Power On
Power off
Power On
Power off
Power On
Power off
Power On
Power off

My second console Log:
===================================================
Monday, November 06, 2017 1:58:59 PM

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Power off
Power On
Power off
Current: DemoN
Switching to XBOX
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
ECC created
Current: XBOX
Switching to DemoN
DEMON
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:11 min
ec

Power On
Power off
CR4 Selected
ECC created
DEMON
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:14 min
ec

Power On
Use Edited Options Selected
Power off
Current: DemoN
Switching to XBOX
Power On
Power off
Power On
Power off
Current: DemoN
Switching to XBOX
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump1.bin
XBOX360
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 1:07 min
ec

Initializing nanddump1.bin..
Trinity
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump2.bin
Nand Initialization Finished
Reading Nand
Done!
in 1:32 min
ec

Comparing...
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump3.bin
Nands are the same
Reading Nand
Done!
in 1:26 min
ec

Comparing...
Reading Nand to C:\Users\Marcin\Desktop\j-runner v3 (beta 7)\output\nanddump4.bin
Nands are the same
Reading Nand
Done!
in 1:26 min
ec

Comparing...
Nands are the same
ECC created
Current: XBOX
Switching to DemoN
ECC created
DEMON
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:14 min
ec

Power On
Power On
Power off
Power off
Power On
Power off
Power On
Power off
Power On
Power off
Power On
Power off




My Nand Info and Soldering:
https://imgur.com/a/h8nYh
 
Last edited:

Nicram

Noob Account
Nov 5, 2017
6
0
It tries to boot, the light is blinking, but it can't, but the fan is spinning normally. Is it maybe the soldering? It doesn't look like it is to me, but I am a noob and no expert.
 
Last edited:

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
It tries to boot, the light is blinking, but it can't, but the fan is spinning normally. Is it maybe the soldering? It doesn't look like it is to me, but I am a noob and no expert.
cr4 ticked in jrunner when making ecc?
 

Nicram

Noob Account
Nov 5, 2017
6
0
Yes, tried to read nand in xbox and write ecc to demon several times. Xbox boots normally, when I boot it.
 

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
seen your pm man,and id love to help,but truth is im a single father to a now 15 month old baby girl,i work full time for somewhere and come home and have a full time job with my own business work,as well as taking care of her while i do it. i dont work with alot of time everyday,lol
 

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
Did you try writing the ecc with the demon fusion write option under the advanced menu? Sometimes there is a bad block on a nand that doesnt get remapped automatically when writing an image, or generic ecc image to a nand. If not, try disableing the cr4(removing the jumper should do the trick), and writing the stock nand to the demon, and see if it boots off of the demon. This will at least let you know if the problem is with the CR4 wiring, or with the demon wiring. Also, I would make sure you didnt get the SBR wire mismatched, as if it isnt reseting the smc, it wont load the new image off of the new nand, and that will cause this issue also. Just a few ideas to help with the process.