TRINITY Trinity install - steps?

[jappish]

Hey guys,

I'm still feeling a bit insecure with some of the steps, so I thought I'd ask before proceeding.
This post answered some of the questions I had, but not all.

I've installed the trinity v3 QSB and dumped nand, pics here: http://postimg.org/gallery/1g5wdad2/
nands are the same.

This is where I stopped.

Do I now:

1. load source and choose nand dump file (since everything is unplugged now)
2. select dash (same dash version? 16767?)
3. tick RGH2 and CR4 (not glitch2m?)
4. Click create ECC

While xbox is plugged in to power and jrp v2 is connected

5. write ecc

unplug xbox from power and disconnect jrp v2

Install CR4 chip and boot xell, get CPU-key

unplug everything - then plug power to xbox and connect jrp v2

6. create XeBuild image
7. write nand



Are the steps the same for corona v1?

I think it's the glitch2m thing and dash versions that get me confused the most.

Thanks guys

 

[BL4K3Y]

Everything you have said is correct, but you don't need to build the final image using the glitch2m build type.

Nice soldering by the way .

 

[jappish]

Thank you, now I can proceed with confidence =)

Thanks, nice to hear =)