RGH Trinity issue

[salomon890]

Hello,

somebody send me one slim which has e71 and that person sell separatelly the dvd rom(originaly was 0904).
He wanted rgh.So,i fixed error 71,using one dvd rom with fw 1175 dumped with nand-x and after that writed image.ecc.

Problem is the console now didn't work anymore is entirely dead.I solved that in past with original dump and JR,but now i get only errors and nothing changes.Tried different ways,with nand x ,even skeet ,but issue not solved.

Probably i should not use that dvd-rom from one corona,with that fw 1175,and i should have one original 0904 or 0272 flashed to stock.

So in first step i fixed that e71,but in very same way i corupted the nand and when i use JR to dump i get 3 bad blocks.

But why it did not let me flash that dump again?Somebody else had ever encountered same issue?And after that discovered a way to bring mobo back to life?

 

[Martin C]

Yes - it's called sending it to someone for repair.

 

[salomon890]

So you do not know which is the solution?actually i fix this kind of things.Soon or later i will solve this too,looking for an advice ,maybe from someone which had in the past that kind of problem.not trying to discover the fire again.e 71 is usual i've read a lot of posts on this forum but not the answer yet to this.First e71 ,after trying rgh ,now mobo dead.

 

[Martin C]

If it was powering on before you started to solder to it, there's the problem.

This is not a forum for people to help you fix random consoles. this issue has nothing to do with T-X. You are welcome to post in the 'request a service or item' section.

 

[Blair7635]

So you do not know which is the solution?actually i fix this kind of things.Soon or later i will solve this too,looking for an advice ,maybe from someone which had in the past that kind of problem.not trying to discover the fire again.e 71 is usual i've read a lot of posts on this forum but not the answer yet to this.First e71 ,after trying rgh ,now mobo dead.

Not to be mean but, u shouldn't be offering services to other people if u cant perform a simple RGH. :facepalm:

 

[yoohoomat]

If you hooked up all the rgh wires and it worked before you did it you probably lifted the stby clk pad or have it bridged if it just beeps when you try to turn it on. Sometimes even if you dont think you lifted that pad you did. A great soldering iron goes a long way i learned that the hard way. There is a tutorial on how to wire the alt stby clk. Pics of your install would be helpful and help narrow down the issue along with j runner log. If I were you I would let someone fix it though cheaper then you completely breaking it and having to replace the console.