Trinity not booting after a resolder,TEMPLATE INSIDE PLS HELP

[DormantBeast]

As in how its wrapped or solder points? Can u pls specify what exactly u wud like pics of, and thnx for the info

 

[b3datarin]

:tongue:
learned few things here
sometimes tiny things on soldering make big problem .
u should insert pic of your installing clear to anyone can help u.
if you have any trouble in boot dash or xell it is 99%about soldering .

test console on retail nand also . this is very very imprtnt

 

[DormantBeast]

:tongue:
learned few things here
sometimes tiny things on soldering make big problem .
u should insert pic of your installing clear to anyone can help u.
if you have any trouble in boot dash or xell it is 99%about soldering .

test console on retail nand also . this is very very imprtnt

I do have pics, of all solder points in very beginning of post are they not visible? I used the lil add pic btn in advanced mode to put them in post... I can see them am i only one?!?!???

- - - Updated - - -

Will slim boot up with factory nand with pulled pad?

 

[b3datarin]

if console boot in factory nand with pulled pad
so it can glitch
if not . NO
test and report

pic of CPU_RST point i said

 

[DormantBeast]

Okie dokie with the gf @ gym will report in a couple hrs, with factory nand and pic of cpu_rst which wud be of r4d4-->xclamp--> cr chip then the pic of r4d4 with blue wire is in first page. I'll post a closer pic of r4d4 if thats what u wud like

 

[b3datarin]

CPU_RST area that i want to see is FT4R2

 

[DormantBeast]

That pad is lifted, but still will get pics up later today after work

 

[DormantBeast]

 

[DormantBeast]

rewrote factory nand

 

[DormantBeast]

delete double post....

I get a red dot which happened to me b4... and the white wire spliced b/w kynar r4d4 and c5r11 fixed it last time, I was sure it would red dot again but i tried it anyways... so whats next step? order a new white cable and keep trying with it since it was working with it at first?

 

[b3datarin]

did you test connectivity between R4D4 and C5R11 ?

what is second ERROR CODE ?

 

[DormantBeast]

Error code is
0032

all 4 lights, 4 lights again, top2 1Btn Rght, top 2

 

[DormantBeast]

no I haven't tested connectivity dont have a multimeter need to get one asap

according to online guide it needs a reflow but I dont understand how it needs one when it was working fine a few days ago :'(

again fixed a red dot first time with a bought white wire so I'm thinking this can still be saved hopefully

 

[b3datarin]

i am sure about bad connectivity .check wires and fix that . console will fixpretty sure .

 

[DormantBeast]

Mmk I'll get a multimeter tmrw if possible and check.

Wud i just put one tip on each solder point of wire, Same wire tip on chip and mobo solder point?

So I dont really understand? One wire is not getting electricity thru it?

 

[DormantBeast]

i am sure about bad connectivity .check wires and fix that . console will fixpretty sure .

Thank you very much for this help, I really appreciate it.
thnx buddy

 

[b3datarin]

you could wire from point on this pic to R4D4 .
and you will see console boot .
then go for second wire from same point for D on CoolRunner .

 

[DormantBeast]

Ok so bridge r4d4 to c5r11 with kynar that shud make console boot with factory nand,.. Then again from c5r11 a second wire but this time to point D on CR. Correct?

I'll try this first thing once i get home

 

[DormantBeast]

Thnx so much it works now!

It freezes everynow and then and doesnt like being in the cage it helps if i wiggle the blue wire but its a pain disassembling it, i currently have it laying not screwed down in its cage it seems to work with random freezing

I tried wrapping blue wire several different ways around xclamp but a few times green light would go out after 3 pulses and then nothing... As of now it has been behaving i have for it wrapped a lil odd arouns xclamp but hey it boots up

 

[DormantBeast]

Wud u guys say arctic silver ceramique 2 is safe to use on our xbox?

Freezing a lil more often