RGH Trinity Power Issue

AteOeight

VIP Member
Feb 22, 2012
278
0
Hawaii
I RGH'd Trinity using JRunner, nand read four times... all good. Glitched fine for Xell and RGH, set it aside for a month, and came back to it. Now the consoles works for awhile then starts to have power issues. After awhile of playing it starts degrading with shutting off, then no power. My external HDD starts to go on/off. Chimes on power and eject buttons, but doesn't turn on. When sitting with power cord in, it randomly goes on quick with fans at %100 then shuts off. Also, it randomly ejects tray and closes tray. I noticed the CoolRunner power LED is dim...
 
Last edited:

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
Use the supplied wire (black) for the GND connection.

You may also wish to re-solder the 3.3v wire (on the CoolRunner and the point on the motherboard) to ensure a good connection.
 

AteOeight

VIP Member
Feb 22, 2012
278
0
Hawaii
I have used the supplied GND wire, but lemme get back yous about the resoldering.
 

AteOeight

VIP Member
Feb 22, 2012
278
0
Hawaii
probably one or more cold joints due to oxidation in solder
Sorry, I haven't been soldering long. How does oxidation occur in solder, is that when not enough flux is used? What's cold joint?
 

sarah1331

BANNED
Feb 22, 2012
867
0
Sorry, I haven't been soldering long. How does oxidation occur in solder, is that when not enough flux is used? What's cold joint?
Ignore him oxidation only happens to untinned copper

I would reheat all your joints tho and test with multimeter


Sent from my iPhone 4s using Tapatalk
 

AteOeight

VIP Member
Feb 22, 2012
278
0
Hawaii
I'll give all the advise a shot, will be back to thank...
 

AteOeight

VIP Member
Feb 22, 2012
278
0
Hawaii
So all points test good with multi meter. Wrote original nand with success and no bad blocks, console boots fine and shuts off automatically intermittently. Then console E71, E79, and RDODs ramdomly. Then boots fine on another try... I'm soon throwing in the towel on this console.