RGH Trinity problem with creating ECC

[shippppppy]

Hi, I have never really seen this problem. Now i dont really know if it is a real big deal or not.
Its a trinity 4gb.

Here is what pops up when i try to create a ecc.

REAL J-Runner LOG
===================================================
Sunday, January 4, 2015 3:43:32 PM


J-Runner v0.3 Beta (7) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 3.1
CB_A: 9231
CB_B: 9231
CD (image): 9231
CD (decrypted): 9452
* checking required versions...
ok
* patching SMC...
Patching Trinity version 3.1 SMC at offset 0x13B3
* Replacing CD...


* XOR HACK NEEDED FOR CB 9231
File C:\Users\glanz_000\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\common\CB\CB_B.9231.bin not found!
Failed to open CB_B.9231.bin

Now i off the top of my head i think the dash on this console is 16756.

I Get two good dumps of the nand and they both match but I keep getting this error.

If someone new how to fix this or if i get the nice opportunity to through my sweet xbox out of a 3 story window.

 

[BL4K3Y]

Load your stock NAND image as the source in J-Runner and click the "Create ECC" button.

If you are using a CR4, you need to check the CR4 check box first.