Trinity RGH - if wifi is connected coolrunner green led wont flash.

[gasmask]

Okay - ive done about 8 RGH consoles 2phats and all other slims.

in this particular console, the RGH is working it glitches about 1-3 cycles. But when i connect wifi card (The usb slim default one) Coolrunner green led wont flash and no boot/glitch/xell nothing!

So i tryed to rawflash it to overwrite the nand with usb stick plugged in and nandflash.bin and xenon.elf files on it - it wont boot when i try to go to XELL.

Anyways i burned a disc and booted to xell (no usbs connected ofcourse) but the rawflash didnt finish!
It will be stuck initlizing wirless controllers 1..4.

Everything else works - ethernet port, sata, dvdrom and usb controller and usb work in dashboard.

 

[superspeed]

Okay - ive done about 8 RGH consoles 2phats and all other slims.

in this particular console, the RGH is working it glitches about 1-3 cycles. But when i connect wifi card (The usb slim default one) Coolrunner green led wont flash and no boot/glitch/xell nothing!

So i tryed to rawflash it to overwrite the nand with usb stick plugged in and nandflash.bin and xenon.elf files on it - it wont boot when i try to go to XELL.

Anyways i burned a disc and booted to xell (no usbs connected ofcourse) but the rawflash didnt finish!
It will be stuck initlizing wirless controllers 1..4.

Everything else works - ethernet port, sata, dvdrom and usb controller and usb work in dashboard.

Check for bridges. Can you post some pics?

 

[gasmask]

Weird but, had the console sitting for a hour off the power and now i plugged usb with rawflash 4.0 and it worked, did the flashing and usb wifi card also works - any idea what was causing it?