DGX Trinity Unglichable model

[Jonys]

Hi after 2 months i get a non glichable DGX
Trinity witch CB 9231

console updated from 16197 to 16202 dash

i tested all of different configuration and options

sizes 50 -120 POST_OUT
sizes 7-17 CPU
CAP D-GND 10pF

and nothing i think when console updating from
16197->16202 some efuse line was burns and that is reason why console is not gligchable for DGX

or if u think others u can put here yours ideas

Kind Regards

 

[Martin C]

Yes - send it to someone who knows what they're doing.

If the console boots to stock NAND ok, you can use the DGX to get the CPU key.

 

[Jonys]

i wrote than is non glitchable for DGX pls read my first post )

 

[BraveH43]

i wrote than is non glitchable for DGX pls read my first post )

and Martin is suggesting you are not doing it correctly - as all slims are glitchable!

 

[Jonys]

i make a many many xboxes Trinity corona v1 v2 v3 v4

and never had any problems this is the first Trinity that was non glichable

i do everything i do perfect solder dump wrote ect

if u have pls wrote concrete proposals for this isue

i will be appreciate

 

[BraveH43]

well if you have experience........... you should know trinity is the hardest to use DGX with , there are many many threads regarding peoples working setups on trinity - search the forum a bit!

 

[madhacker83]

All trinitys are glitchable, your just not trying hard enough. I had one that took forever (5 days) before the screamo trick... if there were unglitchable trinitys don't you think you would see more post about them besides this one from you?

 

[RF1911]

Try a double CPU_RST wire, from pad D to under xclamp C5R11 and another still from pad D to usual FT4R2 point, basically make an Y.

 

[bsmiley]

i had one not booting but i looked on diff sites and i tryed this and worked with in 5 secs


Use the 11cm ground wire that comes with the DGX for the D wire. And use a substitute wire for GND (preferably a thick wire like a 5v)

Take a Phat Green (pll_bypass) wire and a Slim Blue (cpu_rst) and solder them together to make a long wire for C (post_out)

Install the rest like a normal DGX

 

[playingmax]

Post pics.
Or send it to me, Ill get ur cpu key..

 

[Jonys]

thx for all ideas i try all oy your posts and wrote of my results

 

[thebomber]

i actually had a non glitchable one, which no matter what wasnt glitching, dgx or coolrunner's sent it to someone here in egypt and still he couldnt get it done, i ended up throwing the mobo , cause sending it to the states will cost me more than what the mobo costs, so i suggest passing it over to someone before giving up, try to read the faq about stubborn trinity's, if i were you i would send it.

 

[dogeatdog]

Don't throw it away, dumbest thing I ever heard. What others here say is correct, if it still boots stock it can be glitched. What works for trinities (I've had a few that wouldn't give up their secrets right away) was using a yellow phat wire soldered to a blue slim wire and use that for the post_out and then I used a yellow slim wire for the cpu_rst on the 'old' point FT4R2. Should glitch within 10-20 attempts. Let the long wire hang loose on the topside. Oh, and as weird this might sound, I had the DGX itself stick up diagonally in the air (but that might just be superstition

Don't give up yet ! (and if you would be able to, you can always send it to me (Netherlands), just pay postage.

 

[daretogo]

i had one not booting but i looked on diff sites and i tryed this and worked with in 5 secs


Use the 11cm ground wire that comes with the DGX for the D wire. And use a substitute wire for GND (preferably a thick wire like a 5v)

Take a Phat Green (pll_bypass) wire and a Slim Blue (cpu_rst) and solder them together to make a long wire for C (post_out)

Install the rest like a normal DGX

I've had great success with this exact method as well.

 

[Jonys]

i see something strength the glitch led does not light all the time the same i mean is a few normal glitch long light and some time make a quick light

maybe this give a new light for this case

 

[Martin C]

Post pictures of your install then please.

Also confirm it still boots stock ok.

 

[Justice1231]

I made a thread when the dgx first came out, the trinity i was trying to glitch just wouldnt work, i bought another dgx incase the first was faulty and that was the same. In the end i ended up using the earth cable on the CPU_RST and 120cm kynar wire on the post out, it glitched first time, right enought it didnt glitch again after that but you only need it to work once.

 

[Jonys]

I make IT finally i use green+blue to POST_OUT route on my hand in up on console

THX for all that helps me big beer for all

 

[GameSysRepair]

I dont know what helped but i took the yellow (phat) wire and the blue (slim) connected them together, and also did the "Y" on CPU reset. Doing that got my trinity to boot within a min to recover CPU key.