TRINITY Trinity wont boot too xell CR4 RGH2+

[2130TOMER]

Hello

I tried to make RGH to Trinity

But I am having a problem, the Console wont boot too xell

​

• Console Type: Trinity
• Programmer Used: JRP v2.0
• NAND Size: 16
• Dashboard version: 17150
• CB Version: 9231
• Screenshot of NAND details from J-Runner:

• J-Runner log:

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
CR4 Selected
ECC created
Version: 10
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min:sec

• Image of the CR4 XL:

• Images of close-up soldering to motherboard:
  
  

• Rater :

log:

CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 0E - CB_B ENTRY REACHED 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Shutdown

• Detailed Description of the Problem:

I read the NAND 4 times by JR-P V2 , i marked the CR4 box , I create the ECC and write it into the console= No xell
I tried to write manually ECC (J-Runner\common\ECC\TRINITY_CR4.ecc) = No xell

• Was the console working before you started: yes

• Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: yes

• How long is the light on for each time: About 1.5-2sec

album full resolution : http://imgur.com/a/pmOZl/layout/blog

Thanks Tomer.

​

 

[GeekHeat]

Have u tried other dip settings and postbit jumpers.

 

[2130TOMER]

I tried to move the jumper to 10 and 100 no help
i didn't touch the dips ..

 

[GeekHeat]

U need to try different dips.

 

[2130TOMER]

Any examples as how to start?

Because there are hundreds of combinations.

​

 

[Utmad]

Try 3 only or 4 only.

 

[2130TOMER]

Success!
DIP 3&6

boot to XELL after 7 glitch..

Some tips for improving boot times?

​

 

[Antalpromille]

Success!
DIP 3&6

boot to XELL after 7 glitch..

Some tips for improving boot times?

​

Other dip settings and/or caps? Didn't you read the tutorial at all?

 

[xzanox]

Give dip 3 only and Postbit 10 ohms a try or only dip 3 and 0 ohms. If that's not working for you start trying different combos

 

[BrockThunderjam]

Or get ahold of a CR Rev C if you can .

 

[Hypotoad]

Not sure if this makes a big difference on Slims but on the Phats I have done you need to keep the wires apart if you want the best boot times, particularly the blue and yellow wires, try to have them not touching the other wires if possible. Or it may be just my imagination.

 

[2130TOMER]

Thank you very much
I play with the settings until I get good boot times

Thanks again to everyone.

​