TRINITY - WRITE ERROR: 202 - Always sector 314/ JR

[Mimoa]

Hi.
Ive done RGH - CR RevC - on my XBOX360 Trinity. When I read NAND in the first time, there was error on sector 314, JR remaped it. Everythink worked fine - Ive done all steps, in the end console boot in 1-2 glitches. I used to use it... Now I want to write the original nand back. I have original bin file, unsoldered CR. When Im trying to write NAND, it says write error:202 sector 314 and continues. All done. When try to boot it starts (I can hear the sound of fan like when glitching, like 2-3 times in second) but ends RROD after cca 4-5 sec. Using J-runner/ JRP.
Do I have to remap the original NAND file some way?
Thanks for your advice.

 

[john mathews]

No u just write. Org nand and u done

 

[Mimoa]

So the RROD is caused by something else - assuming, that the NAND is not corrupted...
Console worked fine - with RGH2 - testing with games - but in time it was disassembled. Since I put it together, it wont boot - but glitch. So I took it apart again, checked soldering/ wiring but found no failure. Without chip it wont boot and RROD. Maybe I bent it near cpu/ mems?. Cleaned the board all over...