Trouble with first XGD3 LiteOn iHAS burn (KProbe included)

[factory0]

LiteOn iHAS424 B, came with GL1B firmware. Crossflashed to iHAS626 B GL29 and then Burner Max. Running on slim LiteOn 16D4S replacement board with LT 3.0

Burn using MKM003, Singapore

Smartburn = enabled
Force Hyper Tuning = enabled
OSW = disabled
OHT = disabled

Cleared OPC history before first burn

OPC = disabled
Burn Speed = 4x

X58 ICH10R chipset being used on a P6TDeluxe v2 motherboard.

I have a X360USB Pro available if it should be used instead??

I thought my KProbe2 looked pretty damn righteous for a first try but I get the clean disc error.

 

[L2000]

Try Burning at 2.4x

 

[YehudaBitton]

no you need burn with opc

 

[factory0]

Turns out my source wasn't good. A new copy with abgx360 on top and the burn works fine.