FIXED Troubles Customizing Xell Boot Options

Status
Not open for further replies.
S

smileyman8b

Junior Member
Jan 20, 2014
10
0
hey this should be a quick question to help finish setting up Xell, i would like to change the boot button for Xell

so i created a copy of my updflash.bin and opened it in xeBuild GUI
went to advanced options selected use custom XeBuild Settings

I then went to the xeBuild Settings tab and went to Page 2
and changed the Xell button options to the Power button left the others on default
(that way eject button would boot pass through on **** but would still boot into the FSD instead of xell and i could boot normally with the guide key on my controller and the power button would boot Xell)

hit Save xeBuild settings

i then loaded the newly created file

i then got my CPUKey from my cpukey.txt

generated the hacked image
i then opened in J-runner
Chose my updflash.bin
set options to R-jtag and aud clamp
left the rest alone and hit write to nand

never got any errors but nothings changed ive tried a couple of times with no luck ive even disabled the eject key function any ideas?


Background pc Info-


Windows 7
im connecting micro usb to the DemoN port
Xbox info-
Phat Falcon
R-jtag
DemoN Dual Nand
****
no xbox 360 hardrive :(
 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
You can do all Xell customizations in J-Runner. Open your original NAND and do it all from there (with your CPU key).

If it doesn't work, post your updflash.bin log.
 
S

smileyman8b

Junior Member
Jan 20, 2014
10
0
Hey!?! :b didnt see that there! anyways still didnt work though here's the log-

===================================================
Friday, February 28, 2014 7:06:45 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing updflash.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Aud_Clamp Selected
R-Jtag Selected
Options.ini file was altered successfully
Use Edited Options Selected
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x1B0
Writing Nand
Done!
in 0:25 min:sec

Reading Nand to C:\Users\Asher\Downloads\output\nanddump1.bin
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x1B0
Reading Nand
Done!
in 0:20 min:sec

Reading Nand to C:\Users\Asher\Downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished
Reading Nand
Done!
in 0:20 min:sec

Reading Nand to C:\Users\Asher\Downloads\output\nanddump3.bin
Comparing...
Bad Block ID 01B0 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01B0 [Offset: 0x6F6000]
Bad Blocks Remapped
Bad Block ID 01B0 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01B0 [Offset: 0x6F6000]
Bad Blocks Remapped
Nands are the same
Cancelled
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Comparing...
Bad Block ID 01B0 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01B0 [Offset: 0x6F6000]
Bad Blocks Remapped
Bad Block ID 01B0 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 01B0 [Offset: 0x6F6000]
Bad Blocks Remapped
Nands are the same

BTW this is the second time youve helped me Thanks i appreciate it! :)
 
S

smileyman8b

Junior Member
Jan 20, 2014
10
0
i also set uart speed to demon aside from setting the power button to xell in the advanced xeBuild Options
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
I see no updflash.bin log, just nand reading and writing in that log. Post the log after you set the xebuild options and create image. at the end of that log it should tell you your cpu/1b1/dvd key and what button xell is set to boot from. I really dont see why you would need to change the default. Honestly, I always wanted to be able to build the image without xell, considering you can use xell launch to and dashlaunch to set it up so all you have to do is hold a button down and it launches xell. I also wouldnt mind getting my hands on a Green and Black Xell like the TX RGX ECCs that were released when the bootloader code was leaked. I like the way that 1 looked better. It is much easier on the eyes, and reminds me of my linux terminal. :)
 
Last edited:
S

smileyman8b

Junior Member
Jan 20, 2014
10
0
wait am i supposed to set the new settings and write/flash the nand or am i supposed to set the new settings create a new nand and then open that one and then flash that one?
if so heres the log for -creating anew one and then flashing it-
===================================================
Friday, February 28, 2014 8:50:07 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing updflash.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
R-Jtag Selected
Aud_Clamp Selected
Use Edited Options Selected
Options.ini file was altered successfully
Using edited settings
Load Files Initiliazation Finished
Hacked SMC detected
16537
Started Creation of the 16537 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.11.647
---------------------------------------------------------------
base path changed to C:\Users\Asher\Desktop\DoT\J-Runner\xeBuild
---- { Image Build Mode } ----
building jtag image


******* WARNING: could not patch SMC reset limit!

---------------------------------------------------------------
C:\Users\Asher\Downloads\066413182707\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16537.0
Console : Falcon
NAND size : 16MiB
Build : JTAG
Xell : power on console with power button
UART : cygnos/demon speed set
Serial : 066413182707
ConsoleId : 019404193618
MoboSerial: 8578443206158277
Mfg Date : 07/02/2008
CPU Key : 849CD312B7CBCDA34BA947099DDD3569
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 6573934C92FF17796B3EBD1D8C5B89E4
CF LDV : 15
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Use Edited Options de-Selected
Saved to C:\Users\Asher\Downloads\066413182707
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x1B0
Writing Nand
Done!
in 0:25 min:sec

be back in a sec to say if it worked:
IT WORKED AND I AM OFFICIALLY MAD AT MYSELF FOR NOT NOTICING TO BLATENTLY OBVIOUS THINGS I SHOULDVE TRIED I AM SRY I WASTED YOUR TIME I WILL GO AND DROWN MYSELF IN A TOILET NOW.. THANK YOU FOR THE HELP
 
Last edited:
S

smileyman8b

Junior Member
Jan 20, 2014
10
0
yeah that was mainly jokingly no toilets were actually harmed with my face :wink: but ill mark the thread answered anyways thanks for the help now for the next step of my project installing ubuntu! :cool2: (sorry if i misspelled it)
scratch that ill mark it answered if i can... :p hahaa anyone know how?
 
Last edited:
R

rasheed2222

Full Member
Dec 23, 2011
31
0
hi, i am having the same issue , i try changing the button that boots xell but it is stuck on wired controller, how do i fix this plz :(
 
Status
Not open for further replies.