[TUT]Installing XeX Menu[N00B Friendly]

[AMIT]

Requirements:
1.A PC


2.A Jtag/RGH ‘ed Xbox 360


3.USB Xtaf Xplorer


4.XeX Menu


5.A USB Drive(At least 1GB or Higher)


6.A Brain


Let's get started!


1. Format Your Usb Device to FAT32 or exFat and connect your USB Device to your xbox and Configure this USB Device Using This Guide !

2.After Completing Configuration Unplug your USB Device from Xbox and Put it to your PC



3.Open up USB XTAF Explorer


4.On USB XTAF Explorer click on FILE, Open First USB Device or if you have any problem the Click on file ,Open USB Manually… & Select Your USB Device !

4.Now you should see a folder Named ‘DATA’ ,just open it & go to Dextop create a Folder Named ‘Content’ and open and make another folder named “0000000000000000” (16 zero’s)

5.Extact C0DE9999 folder from xex.menu.1.1.rar that already downloaded and copy it to that “0000000000000000”(16 zero’s) folder that created in Dextop >Content !
6.Drag Content Folder from Dextop over Xtaf that have been Opened Lately

7.Unplug your USB and plug it into your xbox, if done all process then you can now see XEX Menu installed on your(JTAG/RGH’ed) XBOX !

Alternative One –ISO Version(Thanks Trevor for this idea!)


1. Download XeX Menu (ISO version) !
2. Download ImgBurn (To write image) !
3. Install Imgburn (That you have downloaded lately) and extract XeXMenu_v1.1-ISO.rar (That you have downloaded lately) and right click on the extracted ISO and Select Burn using ImgBurn and burn that ISO to a Blank CD-R


4. Insert this CD-R to your XBOX
5. XeX menu will be launched (Like a Game).
6. It will ask you to sing-in, so just sing in using any of your existing profile.
7. Press RB & Press X then Select DVD you will see C0DE9999 folder, hold on it and press Y & Select Copy.
8. Press X and Select HDD1 go to content>0000000000000000 then press Y & Select Paste and Confirm.
9. Wait for the task to be completed.
10. After the Copy press the big X (guide) and press Y & select yes.
11. You will see XeX Menu 1.1 installed in your game library or Go to Collection>Game Demos and Trials now you can see it was installed:smile:


Note-You need a sata hdd installed on your Xbox to keep XeX Menu Installed or you can run XeX Menu using That Burned CD-R (Like A Game) !



Information: This will only work for a JTAG/RGH’ed xbox 360, it will work for a non-jtag Xbox 360, but it will say "Corrupted file" and when it is corrupted, that means it won't work.


Hope it will be good start for those who just finished Jtag/RGH and looking for what will be there next step !

Download Full Tutorial HERE !

 

[gh2010]

sure this will help a lot of people

 

[WestCoastConsoles]

Just an idea. Add the ISO option to the op as well. I personally use the iso it's easier for mass installs. Great alternative for people with broken USB ports or no USB drive.

 

[AMIT]

Just an idea. Add the ISO option to the op as well. I personally use the iso it's easier for mass installs. Great alternative for people with broken USB ports or no USB drive.

Thanks,TUT Updated !

I will Add Images on this TUT when i get that box from you !

Thanks.............

 

[metaljay]

Appreiate these guide bro, thanks again

 

[Martin C]

Great idea, however I have a USB stick with FSD on it. Boot the console with that and provided you have a LAN cable connected, you can FTP it over. I have a folder which is a simple drag/drop install for FSD, XeXMenu and NXE2GoD onto any RGH console. For one shot installs, the above is fine but for those of us doing installs to multiple consoles, a more organised approach is better.

 

[063 xobx]

a 256MB usb card will not work for an xbox. the minimum requirement is 1GB.

b

 

[AMIT]

a 256MB usb card will not work for an xbox. the minimum requirement is 1GB.

b

Thanks,TUT Updated !:tongue::wink::biggrin:

 

[SLIM360]

Great tutorial ..

 

[sbutler]

Do I need to write to my nand before I can install Xexmenu?
I am going to get a NandX but I cant RGH my box because it is a xenon. I was going to buy the coolrunner but because of the xenon I think it would be more trouble than worth.
If I buy the NandX and install the QSBs then that is considered Jtagged correct? Or do I need to write to the Nand before it is Jtagged?
I want to be able to play my games from the hard drive without a disk in the dvd drive. I had an original xbox that I "fixed" and it could play from HDD and run python scripts. Is that possible with the Xexmenu?
I would also like to add a big HDD. Something like a 500gb. I have heard it is possible with a Jtagged box but I am not seeing any information as to how or if it can be done.
I am not seeing alot of information about the xex or jtagging. Your help will be greatly appreciated.

 

[alexander_1333]

Great tut OP.I use a 4 Gb pendrive.1 Gb formated for xbox where i have xexmenu, nxe2god and a profile.3 Gb fat32 where i have FSD, dashlaunch, xexmenu.xex and other stuff.
The fat32 side it's updated and this way the install of everithing on a machine is done from this pendrive.

@sbutler: xenons are not worth for RGH, only for J-tag if dashboard is 7371 or below.

 

[sbutler]

My dashboard is .13599 That is above 7371.
Could I still read my Nand obtain my DVD key and get an HDD DVD Drive emulation device?

 

[madhacker83]

My dashboard is .13599

Then your out of luck. Sell or trade your xenon for a jtag/rgh'able console.

 

[P Z U]

Thank you for the tut, will try it on my next rgh

 

[playingmax]

My dashboard is .13599 That is above 7371.
Could I still read my Nand obtain my DVD key and get an HDD DVD Drive emulation device?

yes but u will have to do the rgh1 on it. to get the key and dvd key.

 

[qalsan]

hi gys first sory for post here . em use xsft when i read manully usb and after do this the data folder show em cant understand wat can i do /????????