JTAG Tutorial : how to dump a nand from a jtagged console very easy.

[janusgroup]

we will see in this tutorial how to create a dump of its NAND. This is especially useful to those looking for a FreeBoot but do not dump their NAND.



Step 1: Download and Copy the unzipped folder of Flash360 on a USB key.



Step 2: Put the USB key and then launch on the Xbox since Flash360.xex XeXMenu Explorer or Freestyle.



Step 3: Press X: Nand Backup to file current.



Step 4: Press B: Save to file only flash partition.

NB: If you have a 16MB NAND you will probably not do this step was, it only applies to 256MB or 512MB NAND



Step 5: Wait until the procedure and see written "Press any button to contiue" you can press any button (one time only).



Step 6: Press 2 times back (to the left of the guide button) to exit the app and return to the Official dash.



Step 7: Plug your USB key on the PC, go to the directory you will find 360 flash dump your name flashdmp.bin



You are now in possession of a dump XBR allowing you to use the software to create your BestPig Freeboot.bin


Video : [ame="http://www.youtube.com/watch?v=wOP3nDB0_wY&feature=player_embedded"]Dump flash 360 LS - YouTube[/ame]


Have a nice day

 

[Martin C]

Or:

1. boot to Xell with a network cable.
2. go to the address on the bottom of the xell screen.
3. Click the download button next to 'raw flash'.

Why would you want to reinvent the wheel?

 

[Fawad]

Tried Downloading nand from Xell via browser Button next to "RawFlash" on LAN speed is like 3.5kb/sec which i think is very slow. No problem with cable because i transfer all my content VIA Flashxp using that same cable.

 

[Martin C]

Try another browser then. It shouldn't take that long.

 

[navino87]

Nice 1.. Will be useful in some point of time. .TY

 

[axelll]

I must agree with Fawad, I tried to dump the NAND from the browser, tried IE, Firefox and Chrome, top speed was 5 Kb/s and It took 1 hour to complete.

 

[Martin C]

I did it the other night and it took 20 seconds!

 

[axelll]

Martin, what browser did you used?

 

[Martin C]

Just using Firefox and a crossover cable.

 

[janusgroup]

check your firewall setting on your pc

 

[axelll]

Then, the crossover cable linked the XBOX360 directly to your PC or to the router?

 

[Martin C]

Direct to the PC.

I'll do it again tonight and report back.

 

[2615863]

Over my router it takes around 2min

Xbox is on ethernet.

Laptop is on Wireless N

Browser: Chrome, and Internet Explorer