JTAG Tutorial Needed !

[Smoke360]

i searched on xenon and non-xenon jtag wiring and really confused what method to use !

but i found BoXXDr Medhod it's really looking easy for me !
just want to try on my friend's 7371 Xbox (I don't know what motherboard he have, i'm going ask him later today,i'm guess he have hdmi)

i go with BoXXDr Medhod for jtag wiring !

thats what i thinking to do !

get nanddump 1 & 2 Compare them ,make a free boot image with 360 multi builder 0.7

could you please tell which one should go with if i used BoXXDr Medhod ?(i believe i need to use 5)

and write the nandflash.bin using nandpro

is that progress will work ?

I can't find xenon wiring or any good tutorial
If any one have a better tutorial please post here(I really need this) !

 

[garageinc]

a

 

[Smoke360]

you may have issues using multibuilder for jtag images with odd smc's like the boxdr method. why did you not just use the standard 2 diodes its by far the easiest. anyway use xebuild gui instead to build your freeboot as it has better options for smc config and a nice user interface

ok then i use jtag tool then but what smc i need to choose ? jtag tool have 3 original , aud_clamp only , aud_clamp and dvd tray !

dose xell process should like RGH or do i have to do the old one like extracting smc config etc ?

do you know any other good wiring that could help me to build a 14699 jtag image ?

 

[garageinc]

a

 

[Smoke360]

do you have 2 diodes real soldered pic ? i can't understand edited one !

 

[garageinc]

a

 

[Smoke360]

the edited photo in jtag tool has a black line to show you which way the diode faces, the diode will also have this line.

thanks but it's a xenon i also wanted to see non-xenon please ?

how i am i know which is right way of diode & what about the yellow or white ?

 

[garageinc]

what! look at the photos in the guides man i'm not photobucket :rolleyes2: its all in jtag tool anyway. your basically ignoring my advice anyway so good luck with it.

 

[Smoke360]

what! look at the photos in the guides man i'm not photobucket :rolleyes2: its all in jtag tool anyway. your basically ignoring my advice anyway so good luck with it.

at least give me that what you using or used ?

and is xell process same as RGH or Have To do old stuffs ?

---------- Post added at 01:57 ---------- Previous post was at 01:56 ----------

I mean Guide !

 

[Indestructable]

take garageinc advice and go look yourself before bandits spoon gets you

 

[Smoke360]

i don't understand why you guys are like this but thank you help me 75 % on 100 !

 

[actiondanuk]

i don't understand why you guys are like this but thank you help me 75 % on 100 !

Seriously??

If he helped you anymore, he would be doing the install fo you!!!
All the pics you need are in jtag tool, and it guides you through step by step.

 

[Smoke360]

what is the maximum fan speed that i can set by xeBuild GUI ?

---------- Post added at 02:42 ---------- Previous post was at 02:34 ----------

or dash launch 2.27

 

[Martin C]

Seems you've not actually done much reading at all.

As a noob, your first job is to read ALL guides and stickys. It's right there in the rules.

Don't bother posting back until you've done this.

 

[jtag360.nl]

Thank you Martin, I was thinking the same.

I think we all learned by a lot of searching and reading.

 

[Ubergeek]

why dont you just use the easy Xenon JTAG Kit that comes with the NAND-X or sell separately as a standalone item (very cheap)

This is an Xecuter product support forum - you come here when you need help with Xecuter products NOTHING else.