Ultra stubborn Corona

[Vampirtc]

I have gotten a Corona motherboard on 16202 which seems impossible to do. Someone else was already working on it before handing it over to me.
Stock nand works.

I tried postfix adapter (although not needed), different cable lenghts (mostly CPU RST 10,50,70,120cm).

I tried three different TX DGX (even 1.1S). Console glitches normally, but almost never stops, even after hours. After about 12 hours and plugging in/out at least 50 times I have managed to get "crashed" Xell twice. Tried both ECC, different wires.

Any ideas for this piece of art? (have done over 100 with DGX so far).

 

[Martin C]

Corona DGX wires should be as short as possible.

Pics and logs please.

 

[Vampirtc]

For the first 4 hours I tried short wires. But one of those stubborn ones needed 70cm CPU-RST and after about 50th attempt it worked.
Will post more detailed pictures later.

 

[FlipMode]

Which version motherboard you working on?

Need more pics and information.

 

[luminol]

Don't stop to believe every corona should be easy , Martin said as short as you can , but i've learned that if you you've stubborn corona do it with 10cm cpurst 20 cm for post just add the green wire from phat CR , believe after 2-5 min the green will gone .