un-installed r-jtag now...

XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
hi

i un-installed my r-jtag that i installed so i could use the console online

so i wright the original nand back to the console

now it has 3 red lights when it boots

i tried changing the thermal paste

i have tried different nand dumps as when i did this i made 4 nand dumps

i removed every wire from the r-jtag install

this is starting to p*** me off now

can anyone help

i would post pics but i dunno what of so if you want pics let me know what you want to see

thanks
 
BrockThunderjam

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
What's your secondary error code. Pics of all the points you had soldered would be nice.
 
Taijigamer2

Taijigamer2

VIP Member
Jun 8, 2013
1,292
0
England
I may have been a bit over zealous. put your original nand dump into jrunner and make a note of the LDV, also check the cpu number matches the one for that xbox incase u have mixed the nand dump from another console. Then put your Rjtag image (updflash.bin) into jrunner and check the LDV, in case u made the hack image from a later nand. please post results.
 
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
Taijigamer2 said:
I may have been a bit over zealous. put your original nand dump into jrunner and make a note of the LDV, also check the cpu number matches the one for that xbox incase u have mixed the nand dump from another console. Then put your Rjtag image (updflash.bin) into jrunner and check the LDV, in case u made the hack image from a later nand. please post results.
Click to expand...
i did what you said and its the same ldv
 
Taijigamer2

Taijigamer2

VIP Member
Jun 8, 2013
1,292
0
England
If the LDV checks out then I would be looking at the soldered points on the board for any damage/ bridging particularly D (cpu_rst). Please post pics of all install points.
 
jsinger47

jsinger47

Troll Eating Dogs
Feb 6, 2011
8,133
128
Grand Rapids, MI
Taijigamer2 said:
If the LDV checks out then I would be looking at the soldered points on the board for any damage/ bridging particularly D (cpu_rst). Please post pics of all install points.
Click to expand...

LDV matching with a RGH NAND is not confirming it to be correct. LDV checks don't matter for RGH or JTAG NANDs. The only way he would know for sure what his fuses are would be to boot Xell.
 
  • Like
Reactions: Taijigamer2
crazed-cracker

crazed-cracker

VIP Member
Dec 10, 2011
224
23
OR
XxGLITCH3RSxX said:
i did what you said and its the same ldv
Click to expand...
I have had multiple people like you bring their R-jtag in after trying to install or remove the kit and messing up. In pretty much every case of 0022 it was the cpu_rst. I would check the underside (if thats where you used) and make sure there are no bridges or damage.
 
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
crazed-cracker said:
I have had multiple people like you bring their R-jtag in after trying to install or remove the kit and messing up. In pretty much every case of 0022 it was the cpu_rst. I would check the underside (if thats where you used) and make sure there are no bridges or damage.
Click to expand...
hi there is the picture http://s29.postimg.org/c3xy5o2t3/DSCF1294.jpg

i touched up the points looks a little worse in the picture but i carnt see anything touching !
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Did you boot to XeLL before removing the R-JTAG kit to ensure the fuses matched your original image?

How many seconds does it take to 0022?

Are you 100% sure you wrote back the correct image?

Did you build the original image yourself or was it from the original dump?
 
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
Martin C said:
Did you boot to XeLL before removing the R-JTAG kit to ensure the fuses matched your original image?

How many seconds does it take to 0022?

Are you 100% sure you wrote back the correct image?

Did you build the original image yourself or was it from the original dump?
Click to expand...
i did not boot xell i booted the r-jtag a couple of times to check it worked never really thought at the time about booting xell until the problem started messed up there

i have not counted but between 10-30 seconds maybe a little more

yes i am 10000% sure i wrote the correct nand as i have made some jtags for other people i nand this nand dump as myelitenand dump.bin

and its a original nand dump

thanks for your help pal
 
B

briggs01

VIP Member
Feb 17, 2013
1,324
0
just a thought could it be the fact that if you read your nand at dash e.g 15574 then jtaged it and updated it to dash 16547 then later flashed your original nand back would this give you 0022 error
 
Last edited:
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
briggs01 said:
just a thought could it be the fact that if you read your nand at dash e.g 15574 then jtaged it and updated it to dash 16547 then late flashed you original nand back would this give you 0022 error
Click to expand...
that is a fair point i think it the r-jtag nand could of been a higher dash maybe carnt remember for f*** sake

what could i try to fix this
 
B

briggs01

VIP Member
Feb 17, 2013
1,324
0
XxGLITCH3RSxX said:
that is a fair point i think it the r-jtag nand could of been a higher dash maybe carnt remember for f*** sake

what could i try to fix this
Click to expand...
not sure mate you need to ask someone like martin for advice on that budy you may have to build a new original nand on the latest dash or the one you used in jrunner but you will still need fuse values first as martin said
 
You must log in or register to reply here.