un-installed r-jtag now...

[XxGLITCH3RSxX]

not sure mate you need to ask someone like martin for advice on that budy you may have to build a new original nand on the latest dash or the one you used in jrunner but you will still need fuse values first as martin said

these fuses have still got me a little confused atm

 

[briggs01]

these fuses have still got me a little confused atm

https://www.google.co.uk/url?q=http...oQFjAB&usg=AFQjCNFOlPj00zbjLV1NuLWYXUEjOOb_Hg

 

[ezzda1]

The only way to check your fusesets is to boot to xell.
I'd make sure you have the correct nand for the console.
As long as it's not been case swapped. check serial number etc in jrunner against the back of the console.
write the ecc wire up a coolrunner or the rjtag and boot xell.
otherwise you are going to be doing a lot of guessing

 

[Oggy]

The ldv can only be a few values as for rjtag to work it mustve been on 15574? Minimum and thered only been 3/4 dashes since.

Wont take too long to try them all.

 

[briggs01]

boot to xel Count the number of ffff’s you see on lines 7 and 8 (directly below the CPU key). This is the current LDV number for the console. As long as you don’t run any more official MS updates, this number won’t change. Alternatively on phat consoles, remove R6T3 and this number will NEVER change, regardless of what you try to apply.

 

[XxGLITCH3RSxX]

boot to xel Count the number of ffff’s you see on lines 7 and 8 (directly below the CPU key). This is the current LDV number for the console. As long as you don’t run any more official MS updates, this number won’t change. Alternatively on phat consoles, remove R6T3 and this number will NEVER change, regardless of what you try to apply.

i have to go out be i will try this

 

[Martin C]

boot to xel Count the number of ffff’s you see on lines 7 and 8 (directly below the CPU key). This is the current LDV number for the console. As long as you don’t run any more official MS updates, this number won’t change. Alternatively on phat consoles, remove R6T3 and this number will NEVER change, regardless of what you try to apply.

You mean reading the LDV sticky I wrote? Much easier to advise than typing everything out again.

 

[briggs01]

You mean reading the LDV sticky I wrote? Much easier to advise than typing everything out again.

as i stated in post 20 mate , he needs to ask someone like you , i just copied and pasted it

 

[briggs01]

as i stated in post 20 mate , he needs to ask someone like you , i just copied and pasted it

i think it was easier for him to to copy and paste what i read on c4eve.com

 

[Martin C]

There's a sticky for a reason though. He's been advised to follow it and people are still replying just to repeat the information already given. You don't need to keep replying.

 

[briggs01]

There's a sticky for a reason though. He's been advised to follow it and people are still replying just to repeat the information already given. You don't need to keep replying.

understood martin , but when he said he was still confused with the fuses i felt a bit sorry for him lol , and spelt it out for him sorry mate

 

[Martin C]

understood martin , but when he said he was still confused with the fuses i felt a bit sorry for him lol , and spelt it out for him sorry mate

If you're confused on how to boot xell and report back with your fuses, you have no business modding consoles.

 

[briggs01]

If you're confused on how to boot xell and report back with your fuses, you have no business modding consoles.

true mate true

 

[XxGLITCH3RSxX]

If you're confused on how to boot xell and report back with your fuses, you have no business modding consoles.

i think he got confused with what i ment i got a little lost with everyone talking about the fuses

i now about booting xell ect all that stuff

i am going to do a rgh 2.0 to boot xell to check the fuses once i have done that i will report back to you

i was going to do it yesterday then today but been out most of the 2 days i want to get this sort so i will do asap once i get some time haha

thanks for all your help

i will do the rgh 2.0 to boot xell asap thank you

 

[gavin_darkglide]

Just for future reference, all you had to remove was the post out ribbon cable, and write back stock nand. If you had done just this, then all you would have had to do was write back ecc, and plug in that cable, and could have saved yourself a ton of time. An even smarter solution would have been to install a demon in the console, then it would have been as simple as hitting a button.

 

[jsinger47]

just a thought could it be the fact that if you read your nand at dash e.g 15574 then jtaged it and updated it to dash 16547 then later flashed your original nand back would this give you 0022 error

No. You are clearly demonstrating your lack of knowledge about glitch images and efuses.

 

[XxGLITCH3RSxX]

Just for future reference, all you had to remove was the post out ribbon cable, and write back stock nand. If you had done just this, then all you would have had to do was write back ecc, and plug in that cable, and could have saved yourself a ton of time. An even smarter solution would have been to install a demon in the console, then it would have been as simple as hitting a button.

yeah a now i made a mistake ffs

and to top it of i just carnt see to get 30 mins to install coolrunner when i do i will update everyone

thanks to everyone here who has help in some way or fashion ha thanks guys means alot

 

[briggs01]

No. You are clearly demonstrating your lack of knowledge about glitch images and efuses.

i know your are correct in saying that i know i dont know half as much as you i am still learning as much as i can when i can , only done my first demon install a couple of weeks ago , anyway back on this, i read that somewhere back in 2012 , and when i read this post it just came back to me so i put it up , i wasnt saying it could be that hence , at the end of the post i am asking , [ would this give you 0022] no i know it wont or as nothing to do with this , as i said i am willing to learn and trying to , thanks jsinger47 for putting me right

 

[Martin C]

How about (for the last time of asking) those of you unsure about efuses, actually read the LDV sticky? It ain't rocket science.

 

[XxGLITCH3RSxX]

There's a sticky for a reason though. He's been advised to follow it and people are still replying just to repeat the information already given. You don't need to keep replying.

hi i did the rgh 2.0 here is a picture http://i60.tinypic.com/sgh5k8.jpg

as you now better than me

thanks for you help