un-installed r-jtag now...

[scott1503]

hi i did the rgh 2.0 here is a picture http://i60.tinypic.com/sgh5k8.jpg

as you now better than me

thanks for you help

From what I understand in my tired state from martins ldv sticky your cb ldv is 12

 

[XxGLITCH3RSxX]

From what I understand in my tired state from martins ldv sticky your cb ldv is 12

What do I do from here ha were is his stick for this I carnt find it

 

[scott1503]

Check his signature

 

[hersheys247]

hi i did the rgh 2.0 here is a picture http://i60.tinypic.com/sgh5k8.jpg

as you now better than me

thanks for you help

Count the "f"in line 7, your ldv should be 15, when creating nand

 

[hersheys247]

From what I understand in my tired state from martins ldv sticky your cb ldv is 12

12??? Where do u see that

 

[scott1503]

I was looking at line 2 il go back to my corner and read the sticky again

i did look at line 7 and get a ldv of 15 but thought I was wrong so I changed my post

 

[xzanox]

I was looking at line 2 il go back to my corner and read the sticky again

i did look at line 7 and get a ldv of 15 but thought I was wrong so I changed my post

The donkey ears have been shipped to your address, you'll have them in the morning...

 

[Martin C]

12??? Where do u see that

From my sticky. Please don't tell me you can't see it either.

 

[Martin C]

I was looking at line 2 il go back to my corner and read the sticky again

i did look at line 7 and get a ldv of 15 but thought I was wrong so I changed my post

You were right the first time. His CB LDV is 12.

Seriously, is this stuff that difficult to understand?

 

[Oggy]

Correct me if I'm wrong but his CB LDV (cseq) wouldnt be important as it hasnt changed since an rjtaggable CB was released.

That I recall, anyway.

 

[bruno_rv]

So CB LDV in this case is used to be sure he has 15572 and upper stock dash. And CF/CG fuse 7 to insert it into jrunner when making retail nand,in this case LDV 15. Or am i missing something?

 

[gavin_darkglide]

So CB LDV in this case is used to be sure he has 15572 and upper stock dash. And CF/CG fuse 7 to insert it into jrunner when making retail nand,in this case LDV 15. Or am i missing something?

no, u got it right, CB LDV tells u what dash you can build, in this case 15572+(Which should be assumed, as r-jtag doesnt work on a dash below this.), And fuse line 7/8 tells you what your dash update LDV is. in this case 15. It is not rocket science.

 

[Martin C]

So CB LDV in this case is used to be sure he has 15572 and upper stock dash. And CF/CG fuse 7 to insert it into jrunner when making retail nand,in this case LDV 15. Or am i missing something?

no, u got it right, CB LDV tells u what dash you can build, in this case 15572+(Which should be assumed, as r-jtag doesnt work on a dash below this.), And fuse line 7/8 tells you what your dash update LDV is. in this case 15. It is not rocket science.

Exactly - like I said, it's not rocket science. Glad some people have the ability to read

 

[Slayertex6]

Build a 15574 retail, with ldv of 15 and it should boot. If boots with christmas lights, you've altered or don't have the correct kv. If it doesn't, break out the MM and do some checking.

 

[XxGLITCH3RSxX]

Build a 15574 retail, with ldv of 15 and it should boot. If boots with christmas lights, you've altered or don't have the correct kv. If it doesn't, break out the MM and do some checking.

hi can you help me please

i dont now how to make a nand from scratch

i have had a quick look on google but nothing solid

can you point me in the wright directions or help me please thank you

 

[Taijigamer2]

http://team-xecuter.com/forums/showthread.php?t=92607 try this sticky out. All the info is available on this site. Good luck. Was it a LDV mismatch then?

Edit: As u have your original NAND it's probably easier to put your NAND in source and build retail image using the options provided in jrunner but the general principles still apply.

 

[Antalpromille]

http://team-xecuter.com/forums/showthread.php?t=92607 try this sticky out. All the info is available on this site. Good luck. Was it a LDV mismatch then?

Edit: As u have your original NAND it's probably easier to put your NAND in source and build retail image using the options provided in jrunner but the general principles still apply.

or he could read the jrunner manual as its explained there

 

[Taijigamer2]

Lol, yeah that would be easier :tongue:

 

[teozfrank]

I dont mean to hijack this forum but I have the exact same problem. 3 RROD 0022 secondary code after re writing the origional nand back to a console I R-JTAGed but removed. Thing is I have the origional image from xell for the fuse sets when I initially got it to boot into xell. The origional dash was 15574, and the custom nand image i wrote was 16747 or 16547 i cannot remember which.

So can i work out the fuse sets form the origional image I have or am i screwed? Bear in mind I cannot get the new fuse sets from xell as I have the R-JTAG removed from the console.

 

[Utmad]

I dont mean to hijack this forum but I have the exact same problem. 3 RROD 0022 secondary code after re writing the origional nand back to a console I R-JTAGed but removed. Thing is I have the origional image from xell for the fuse sets when I initially got it to boot into xell. The origional dash was 15574, and the custom nand image i wrote was 16747 or 16547 i cannot remember which.

So can i work out the fuse sets form the origional image I have or am i screwed? Bear in mind I cannot get the new fuse sets from xell as I have the R-JTAG removed from the console.

You should post this in a new thread if you want personal support else things get very messy