Un modding samsung drive

[Oxide]

How do i restore my FW to its origional state , is it like hitachi drives or do i have to have my origional b4 flashn it? because i dont have it anymore.

 

[hamb0]

as far as i know you must have your original for the samsung drive.

I e-mailed it to myself put it on a thumbdrive and a partition lol, anyways if you get your original back by some miricle

set it up just like you would if you were flashing it with xtreme52 or w/e

but when it wants you to put in xflash or xread or w/e

type in mtkflash w /m /sata orig.bin (for ms28)

I have never done a ms25 so im not 100% sure on this but it should be

mtkflash w /m orig.bin just leave out the sata part, if im wrong lemme know.

 

[Oxide]

how do i get it to flash though cuz im using the 0800 disk. how do i get it to go back to normal cuz of the firm gaurd and me having to turn off the 360 meaning id have to laeve the 800 disk in there?????

 

[Oxide]

2day bump

 

[Oxide]

any1?

 

[montana69]

Once you put the disk in and hear the laser not moving anymore and the disk is just spinning, your drive is in the correct mode now. Hit eject on your console and take the disk out, close your tray. Flash from there with your original firmware.

 

[lang]

You bumped this for days and everything you're asking is right in the tutorial section if you just would have looked.

0800 disc is covered in the tutorial here:
http://www.360mods.net/Downloads/details/id=61.html

Restoring Samsung drives here:
http://360mods.net/Forums/viewtopic/t=2793.html

 

[Oxide]

thank you big