Unable to flash my xecuter x3 ce chip

[mybox2003]

I recently bought for my v1.6b xbox the executer x3 ce mod chip. I installed it my self and when i started it up it turns on in the boot mode when the switch position is in off on off off off any other position it wont show the blues bios screen. The screen reads flashbios 3.0.3 and i am able to scroll through the options of how i would like to flash the bios. I went to xbins and got the flash bios version x3 3284 v16plus.bin i have been unable to make my xbox take that flash. i have tried http but am unable to connect, the flash bios screen on the xbox always gives me the dhcp failed-falling back to 192.168.0.99. So i have tried burning cd-r, cd-rw, and dvd-r. On all of these cds i have burnt i have used qwix 1.0.1 to change into iso and i have made a dummy file to go along as well, the sizes i have tried for the dummy have been 100mb, 200mb, and 300mb. i have also given them the name of AAA.AA. For my flash bio i have tried the using the same name i have also changed it to both BIOS.BIN, bios.bin, and bios.iso. Ive tried a lot of combos. When i stick the cds in nothing shows on the screen except Waiting for Drive until it ejects the disk back out. For the dvds it will at least show the cdrom label on the screen but other then that it says Waiting for Drive as well and then eventually it spits the disks back out. I have gone back through and checked all of my soldering and the two blue lights are on on the mod chip. I have tried flashing with both protec on and protect off but their hasnt been any difference in the way my xbox acts. Any help on how to flash the bios would be so cool.