FIXED unable to read nand on trinity?

[vsjsmmks]

never used jr programmer before so forgive me its something stupid!

TX Product(s) used: J-R Programmer v2
Console Type: Trinity
NAND size: 4GB
Dashboard version: e.g 2.0.16547
CB version: ?
Screenshot of NAND details from J-Runner:
unable
J-Runner log: unable
updflash.bin log (if applicable):
Image of Coolrunner:
Images of close-up soldering to motherboard:


Description of problem:
I hook up power to xbox jr programmer 2 lights flash like its getting power I plug in usb jr programmer shows in jrunner go to read nand and jrunner does nothing?
Was the console working before you started: Y

Do you get a green debug light appear on the RGH chip every 4-5 seconds: N/a

How long is the light on for each time: n/a

 

[BL4K3Y]

Post your J-Runner log please.

Have you got those plugs connected the correct way (small notches on them tell you which way they go)?

 

[playingmax]

did u update ur jr programmer?

 

[vsjsmmks]

Post your J-Runner log please.
there is no log!
Thursday, March 6, 2014 6:51:43 PM
J-Runner v0.3 Beta (4) Started

Checking Files
Finished Checking Files
Manually Selected
Trinity Manually Selected
===================================================
Thursday, March 6, 2014 7:01:49 PM
J-Runner v0.3 Beta (4) Started
Have you got those plugs connected the correct way (small notches on them tell you which way they go)?

yes double checked!

 

[gazcoigne]

points look mint you have a nand-x to try or have you programmed the jrp?

 

[vsjsmmks]

did u update ur jr programmer?

that was one of my other threads! I got drivers to install and I ask if I had to update .hex and if so jrunner reads unable to find device! the reponse was if jrprogrammer shows up on jrunner screen its fine!

 

[BL4K3Y]

It looks like J-Runner isn't detecting your JRP.

Normally, you would see "Version: 10" in the log before it tries to read the NAND.

Are the drivers correctly installed?

Do you see the JR logo in J-Runner when the device is connected?

 

[vsjsmmks]

Yes logo appears when I plug in the jr programmer

 

[BL4K3Y]

Yes logo appears when plugged.

Press F2 with J-Runner running and the JRP connected to your computer and console.

Do you see the Flash Config (0x00023010 on Trinity boards) and CB version?

 

[vsjsmmks]

Press F2 with J-Runner running and the JRP connected to your computer and console.

Do you see the Flash Config (0x00023010 on Trinity boards) and CB version?

nope!!
Thursday, March 6, 2014 7:42:04 PM
J-Runner v0.3 Beta (4) Started

Checking Files
Finished Checking Files
Checking Console..
Device Not Found.
Can not continue

 

[BL4K3Y]

nope!!
Thursday, March 6, 2014 7:42:04 PM
J-Runner v0.3 Beta (4) Started

Checking Files
Finished Checking Files
Checking Console..
Device Not Found.
Can not continue

1. Put the device in bootloader mode.
2. Go to "Tools > Update JR-P FW".
3. Select "PICFLASH_E_1_0_5-JRP-V2.hex" from the "common" folder.

Make sure the write verifies and make sure there are no X's during writing.

Once the write has verified, you can take the device out of bootloader mode and reset your JRP.

 

[vsjsmmks]

1. Put the device in bootloader mode.
2. Go to "Tools > Update JR-P FW".
3. Select "PICFLASH_E_1_0_5-JRP-V2.hex" from the "common" folder.

Thursday, March 6, 2014 7:42:04 PM
J-Runner v0.3 Beta (4) Started

Checking Files
Finished Checking Files
Checking Console..
Device Not Found.
Can not continue
Bootloader Attached
Bootloader Version: 1.0.5
Erasing Flash ...
Writing Flash: ..............................................................................................
Done!
Verifying Flash: ..............................................................................................
Write Verified!
Restarting Device ...
Finished!
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.


Now im stuck in bootloader mode!!

 

[BL4K3Y]

Thursday, March 6, 2014 7:42:04 PM
J-Runner v0.3 Beta (4) Started

Checking Files
Finished Checking Files
Checking Console..
Device Not Found.
Can not continue
Bootloader Attached
Bootloader Version: 1.0.5
Erasing Flash ...
Writing Flash: ..............................................................................................
Done!
Verifying Flash: ..............................................................................................
Write Verified!
Restarting Device ...
Finished!
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.


Now im stuck in bootloader mode!!

Move the switch away from the JP-BL text and hold the reset button for a second.

That should take the device out of bootloader mode.

 

[vsjsmmks]

green light flashes for a bit and no lights?

 

[vsjsmmks]

got it to stay green! and doesn't show in bootloader anymore

 

[vsjsmmks]

tried f2 same as before!

 

[vsjsmmks]

drivers im using windows 8 and loaded drivers with zadig!

 

[BL4K3Y]

Is J-Runner running as admin?

If you programmed the device correctly and installed it's drivers (I can see that you have done that), there shouldn't be any more problems.

 

[vsjsmmks]

Is J-Runner running as admin?

If you programmed the device correctly and installed it's drivers (I can see that you have done that), there shouldn't be any more problems.

yes in admin. reinstalling drivers now!

 

[vsjsmmks]

no good!!