ok, well i messed up a little bit and was wondering if its at all possible to revert back to stock with a dumped image on an unexploited console?
unexploited rgh revert to stock?
- Thread starter CheaterTheHax
- Start date
so just put the original nand in source and write nand? i thought you couldnt write to nand on non exploited consoles?
console was never rgh or jtagged before. i messed up a little on the wiring and decided to use the alternate points. I want to start fresh, so im trying to flash to stock. whenever i put the original untouched nand on source and flash over i get 0022 rrod.
I think The 0022 is a problem with one of the points, CPU_PLL_BYPASS I think.
Put some pictures of your points where you mucked up
Put some pictures of your points where you mucked up
Last edited:
il take some pictures when i can find my camera here in a few. one thing i do note though is that the rrod switched to 0012
got some pics...they are bad quality as they were taken with my iphone cuz i cant find my camera charger.
3.3v
CPU_RST
STBY_CLK
ALTERNATE POST_OUT1
ALTERNATE PLL_BYPASS
Another ALTERNATE PLL_BYPASS pic
3.3v
CPU_RST
STBY_CLK
ALTERNATE POST_OUT1
ALTERNATE PLL_BYPASS
Another ALTERNATE PLL_BYPASS pic
Last edited:
i just noticed that where the original PLL_BYPASS should be, the resistor underneath it is missing
I'm not sure about fixing that so I'll leave it to someone with more knowledge to help with that. Good luck.
basically all i want to do here is to start new, with my original nand backup, back on the nand. im not sure if you can write to nand without an exploited box though...
Reading an writing the NAND has nothing to do with exploitability. I'll read over the thread.
If your missing a resistor under the CPU you need to replace it.
If your missing a resistor under the CPU you need to replace it.
What do you mean when you say unexploitable? Do you have a stock 14719 dash on your phat and you tried to glitch it?
I'm talking about NAND writing functions are not determined by dashboard revision. Your NAND is your NAND you can read and write it freely.
You soldering is awful. There is a bunch of weirdness in your pics. If components are missing they need to be replaced.
You soldering is awful. There is a bunch of weirdness in your pics. If components are missing they need to be replaced.