unflag ap25 challenge failed with 2.0.13599.0 dashboard - secdata is invalid

[HyperSonic2097]

Hi all,
i've tried to use findsecdata 0.62 + nandpro 2.0e to unflag (AP25 challenge failed) my xbox (falcon 16mb with 2.0.13599.0 dashboard) but after nand flash xval return me secdata is invalid.
No issue when reading or flashing nand...
i have tried to use findsecdata 0.61 + nandpro20d too with -osc option, no result changed.
Then i've tried with xnand healer, but no change.

It depends on my dashboard?

Im desperate, any help is appreciated.
Oh, and i did not go online with the flag.

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 1
Last filetable change: 0x3D
ECC change: 0x3D Filetbl: 0x0223 Secdata: 0x035B Timestamp: 33766001 2005-11-22
ECC change: 0x38 Filetbl: 0x0364 Secdata: 0x035B Timestamp: 33766001 2005-11-22
ECC change: 0x33 Filetbl: 0x035A Secdata: 0x0246 Timestamp: 33766023 2005-11-22
ECC change: 0x30 Filetbl: 0x0245 Secdata: 0x0244 Timestamp: 3F1D7F17 2011-08-29
ECC change: 0x2F Filetbl: 0x0243 Secdata: 0x0242 Timestamp: 33766001 2005-11-22
ECC change: 0x2E Filetbl: 0x0241 Secdata: 0x0240 Timestamp: 33766001 2005-11-22
ECC change: 0x2D Filetbl: 0x023F Secdata: 0x0370 Timestamp: 3E4B614A 2011-02-11

Checking secdata:
0370 containts not 0 values above offset 1024

Searching for recommended

Extracting secdata:
secdata035B.bin
secdata035B.bin
secdata0246.bin
secdata0244.bin
secdata0242.bin
secdata0240.bin

Extracting filetables:
filetable0223.bin
filetable0364.bin
filetable035A.bin
filetable0245.bin
filetable0243.bin
filetable0241.bin

Creating patched secdata:
Patchedsecdata035B.bin
Patchedsecdata035B.bin
Patchedsecdata0246.bin
Patchedsecdata0244.bin
Patchedsecdata0242.bin
Patchedsecdata0240.bin

Creating patched filetables:
Patchedfiletable0223By0223.bin
Patchedfiletable0223By0364.bin
Patchedfiletable0223By035A.bin
Patchedfiletable0223By0243.bin
Patchedfiletable0223By0241.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata0242.bin 35B 1
nandpro.exe lpt: -w16 Patchedfiletable0223By0243.bin 223 1

Press ENTER

 

[frazzeld]

Have you got your original nand with the AP25 flag?
If you have flash it back

Edit: have you been online since the flag?

 

[HyperSonic2097]

yes, i have the nand with ap25 challenge failed. now im reflashing this, then what should I do?

Edit: have you been online since the flag?

no

 

[frazzeld]

When you have reflashed the nand run findsecdata v062 with Nandpro v2.0d

run cmd
findsecdata.exe nand1.bin -osc

post the log

"nand1 is your original AP25 Flag"

 

[HyperSonic2097]

Ok, reflashed!

and this is the log. oh, im on windows xp 32bit if you do need to know

C:\NandPro20d>findsecdata NandFinalAP25.bin -osc

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x3D
ECC change: 0x3D Filetbl: 0x0223 Secdata: 0x035B Timestamp: 33766001 2005-11-22
ECC change: 0x33 Filetbl: 0x035A Secdata: 0x0246 Timestamp: 33766023 2005-11-22
ECC change: 0x30 Filetbl: 0x0245 Secdata: 0x0244 Timestamp: 3F1D7F17 2011-08-29
ECC change: 0x2F Filetbl: 0x0243 Secdata: 0x0242 Timestamp: 33766001 2005-11-22
ECC change: 0x2E Filetbl: 0x0241 Secdata: 0x0240 Timestamp: 33766001 2005-11-22
ECC change: 0x2D Filetbl: 0x023F Secdata: 0x0370 Timestamp: 3E4B614A 2011-02-11

Checking secdata:

Searching for recommended

Extracting secdata:
secdata035B.bin
secdata035B.bin
secdata0246.bin
secdata0244.bin
secdata0242.bin
secdata0240.bin
secdata0370.bin

Extracting filetables:
filetable0223.bin
filetable0364.bin
filetable035A.bin
filetable0245.bin
filetable0243.bin
filetable0241.bin
filetable023F.bin

Creating patched secdata:
Patchedsecdata035B.bin
Patchedsecdata035B.bin
Patchedsecdata0246.bin
Patchedsecdata0244.bin
Patchedsecdata0242.bin
Patchedsecdata0240.bin
Patchedsecdata0370.bin

Creating patched filetables:
Patchedfiletable0223By0223.bin
Patchedfiletable0223By0364.bin
Patchedfiletable0223By035A.bin
Patchedfiletable0223By0243.bin
Patchedfiletable0223By0241.bin
Patchedfiletable0223By023F.bin

Use:
nandpro.exe lpt: -w16 Patchedsecdata0370.bin 35B 1
nandpro.exe lpt: -w16 Patchedfiletable0223By023F.bin 223 1

Press ENTER

and now?

 

[frazzeld]

It's given you different options this time give it a go, there is still another option if it doesn't work

You haven't updated the dashboard since the flag?

 

[HyperSonic2097]

i used nandpro.exe lpt: -w16 Patchedsecdata0370.bin 35B 1 [enter]
nandpro.exe lpt: -w16 Patchedfiletable0223By023F.bin 223 1 [enter]

secdata is invalid. again...

no, i don't have updated the dashboard since i have the flag.
I was previously on 2.0.12625.0 and my secdata was clean, after I upgraded to 2.0.13599.0 my secdata was flagged

 

[frazzeld]

are you using LPT?

One more option for you...probably a good idea to reflash the flagged nand again then run the following cmd

findsecdata nand1.bin -b 244 35b 245

this should create two more patches to try

 

[Iron5]

Your console is flag!To see if its already mark for ban do this..take out all the memory units (hdd...) of your console,connect the internet cable go to settings,and test the internet connection,the moment your console starts the check on the xbox connection your console will be prompt for update,even if you are on 2.0.13599.0 dash your console will still be prompt for the avatar update from xbox live ( memory cards,usb,or hdd cant be connect on your 360!)do not accept the update an press Y on your controller,after you press Y on controller a bunch of codes values are going to appears on your screen if the Z code value is Z:8015-190D, your console is most likely flag for ban.If you can unflag the console do it and them just do the check ban test before connecting to xbox live.If its a jtag console dont connect it to xbox live at all!

 

[frazzeld]

Your console is flag!To see if its already mark for ban do this..take out all the memory units (hdd...) of your console,connect the internet cable go to settings,and test the internet connection,the moment your console starts the check on the xbox connection your console will be prompt for update,even if you are on 2.0.13599.0 dash your console will still be prompt for the avatar update from xbox live ( memory cards,usb,or hdd cant be connect on your 360!)do not accept the update an press Y on your controller,after you press Y on controller a bunch of codes values are going to appears on your screen if the Z code value is Z:8015-190D, your console is most likely flag for ban.If you can unflag the console do it and them just do the check ban test before connecting to xbox live.

"Don't do this"

 

[HyperSonic2097]

are you using LPT?

One more option for you...probably a good idea to reflash the flagged nand again then run the following cmd

findsecdata nand1.bin -b 244 35b 245

this should create two more patches to try

ok, now im reflashing the dump with ap25 flag and try this! it will takes about 30 minutes... and yes, im on LPT port (setted to normal mode on bios)

Your console is flag!To see if its already mark for ban do this..take out all the memory units (hdd...) of your console,connect the internet cable go to settings,and test the internet connection,the moment your console starts the check on the xbox connection your console will be prompt for update,even if you are on 2.0.13599.0 dash your console will still be prompt for the avatar update from xbox live ( memory cards,usb,or hdd cant be connect on your 360!)do not accept the update an press Y on your controller,after you press Y on controller a bunch of codes values are going to appears on your screen if the Z code value is Z:8015-190D, your console is most likely flag for ban.If you can unflag the console do it and them just do the check ban test before connecting to xbox live.

I prefer not to go online for now:biggrin:

 

[HyperSonic2097]

Ok, done. I have flashed the nand with ap25 challenge failed, then run command findsecdata nand1.bin -b 244 35b 245 and patched the nand... secdata is invalid, again!

log

C:\NandPro20d>findsecdata nandfinalap25.bin -b 244 35b 245

findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x3D
ECC change: 0x3D Filetbl: 0x0223 Secdata: 0x035B Timestamp: 33766001 2005-11-22
ECC change: 0x33 Filetbl: 0x035A Secdata: 0x0246 Timestamp: 33766023 2005-11-22
ECC change: 0x30 Filetbl: 0x0245 Secdata: 0x0244 Timestamp: 3F1D7F17 2011-08-29
ECC change: 0x2F Filetbl: 0x0243 Secdata: 0x0242 Timestamp: 33766001 2005-11-22
ECC change: 0x2E Filetbl: 0x0241 Secdata: 0x0240 Timestamp: 33766001 2005-11-22
ECC change: 0x2D Filetbl: 0x023F Secdata: 0x0370 Timestamp: 3E4B614A 2011-02-11
Extracting forced secdata:
secdata0244.bin

Extracting forced filetable:
filetable0223.bin

Creating patched secdata:
Patchedsecdata0244.bin

Creating patched filetables:
Patchedfiletable0223By0245.bin
Use:

nandpro.exe lpt: -w16 Patchedsecdata0244.bin 35B 1
nandpro.exe lpt: -w16 Patchedfiletable0223By0245.bin 223 1

Press ENTER

C:\NandPro20d>nandpro.exe lpt: -w16 Patchedsecdata0244.bin 35B 1
NandPro v2.0d by Tiros

Testing LPT device address:0378
Using LPT device at address:0378
Flash Config: 0x01198010
Block Size: 16KB Block Limits: 0x00035B..0x00035B
File: Patchedsecdata0244.bin
Writing
035B

C:\NandPro20d>nandpro.exe lpt: -w16 Patchedfiletable0223By0245.bin 223 1
NandPro v2.0d by Tiros

Testing LPT device address:0378
Using LPT device at address:0378
Flash Config: 0x01198010
Block Size: 16KB Block Limits: 0x000223..0x000223
File: Patchedfiletable0223By0245.bin
Writing
0223

C:\NandPro20d>